TSB RVU Engine Control Module Update (I3)
03-12-2007, 02:57 PM
#1
AudiWorld Super User
Thread Starter
Join Date: Mar 2000
Location: Utah, USA
Posts: 3,617
Likes: 0
Received 0 Likes
on
0 Posts
TSB RVU Engine Control Module Update (I3)
Here you go. Looks like there are certain VIN ranges on A3, A4, A6, and A8s where the ECM needs to be re-flashed.
<img src="http://pictureposter.audiworld.com/158/tsb_rvu1_small.jpg">
<img src="http://pictureposter.audiworld.com/158/tsb_rvu2_small.jpg">
<img src="http://pictureposter.audiworld.com/158/tsb_rvu3_small.jpg">
<img src="http://pictureposter.audiworld.com/158/tsb_rvu4_small.jpg">
<img src="http://pictureposter.audiworld.com/158/tsb_rvu5_small.jpg"><ul><li><a href="http://www.stahmann-motorsports.com/Audi/TSB%20RVU/TSB_RVU.zip">Zip HERE</a></li></ul>
<img src="http://pictureposter.audiworld.com/158/tsb_rvu1_small.jpg">
<img src="http://pictureposter.audiworld.com/158/tsb_rvu2_small.jpg">
<img src="http://pictureposter.audiworld.com/158/tsb_rvu3_small.jpg">
<img src="http://pictureposter.audiworld.com/158/tsb_rvu4_small.jpg">
<img src="http://pictureposter.audiworld.com/158/tsb_rvu5_small.jpg"><ul><li><a href="http://www.stahmann-motorsports.com/Audi/TSB%20RVU/TSB_RVU.zip">Zip HERE</a></li></ul>
03-12-2007, 03:27 PM
#2
AudiWorld Super User
Thanks, got anything bigger, or could you email?
Trending Topics
03-13-2007, 06:32 AM
#8
Junior Member
Join Date: Jun 2006
Posts: 1,157
Likes: 0
Received 0 Likes
on
0 Posts
A reflash of the ECU will wipe out a performance chip.......
If it is a GIAC flash, then you can just go back to where you had it done and for normally just the cost of labor get it reflashed back to performance mode. Some chips have a lock out feature which will be bad news when your dealer goes to reflash and sees its been played with.
03-13-2007, 06:42 AM
#9
New Member
Join Date: Jun 2006
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
My ECM Problems.
Audi had my A4 for exactly one mounth trying to figure out a ECM problem. They ended up getting one made in Germany "they said" and shipped out. After installing the new ECM they still came up with some fault codes. They fixed an EGR valve and it seemed to fix the problem. Last night my check engine light came back on. I wonder if my new ECM needs this re-flash or not. Also I wonder if Audi will have my A4 for another month and downgrade me into the base line A4 again.
