Part finally arrived...
#1
AudiWorld Member
Thread Starter
Part finally arrived...
Car should be ready by next week.
Now I need to find some LED rear lights for my car.
<IMG SRC="http://pictureposter.audiworld.com/58615/kwv3.jpg">
Now I need to find some LED rear lights for my car.
<IMG SRC="http://pictureposter.audiworld.com/58615/kwv3.jpg">
Trending Topics
#8
AudiWorld Member
Thread Starter
Re: Congrats, KW FTW!
I will post some pictures of my M40s after KW is installed. Just for your reference. BTW, what finish are you planning to get?
#9
AudiWorld Senior Member
Sweet! My M40's will be brushed...
Surprisingly, HRE recommended 19x8.5" with very conservative offsets. I specified lower offsets based on research I had done, but not quite as low as I had originally hoped because I was afraid of rubbing issues. I'm pretty sure 19x9" would have worked fine but HRE said they could not guarantee fitment so I chickened out.
#10
AudiWorld Member
Thread Starter
Looks like I need spacer after lowered...
The offset of my M40s are very conservative as well even they are staggered offset. Especially the front, they gave me a ET46 offset (rear is ET34). Looks like I need a 10mm spacer for the front and 5mm for the rear. We will see how it goes after lowered.