kkdeluxe

Hi guys,

Anybody can enter at module 46 with vcds 17.1.3 or 17.8?

Regards

Tim-NJ

I think this one is on the coding wiki.

3 Zonen Klimaanlage : Umschalten zw. A/C max und A/C eco ? Audi Coding Wiki

DirkM

You need a HEX-Net or HEX-V2 interface to access all modules in a B9, older HEX-CAN aren't capable of doing that even with the newest VCDS.

kkdeluxe

Thanks, what do you recomend me?

Regards

DirkM

It's hard to recommend one. OBD 11 Pro is unbeatable cheap and a good start to the occasional fault check or coding change. VCDS with HEX-NET (unlimited) or HEX-V2 (limited number of VINs) is reliable but still lacks long coding documentation. VCP is cost wise in the middle and can do more incl. firmware changes but is also dangerously powerful.

kkdeluxe

Thanks!!

keen1988

Thanks for the link. But the link you provide seems is about A/C mode but not Drive Select mode.

keen1988

I did some further search and just realized that Audi call it 'Efficiency' mode in Drive Select, not 'ECO' used by most other factories.

JayPC

Just to let you know, Im in the Uk with a B9 A4. I activated traffic sign detection recently. Im just about to hit the hay, but i think It was in the 5f module and adaptions. I just activated it there and now the traffic signs show up when I drive past them on my Nav screen.

I think the issues you guys might be having is getting the system to recognise NA traffic signs?

DirkM

Any traffic sign shown on the MMI display is from the navigation database, only the traffic signs shown in the DIS/VC are based on real time traffic sign recognition via camera.