:: ECS Tuning :: NEW! ECS Kohlefaser Luft-Technik Intake System | Audi B9 A4 2.0T
#1
Audiworld Basic Sponsor
Thread Starter
:: ECS Tuning :: NEW! ECS Kohlefaser Luft-Technik Intake System | Audi B9 A4 2.0T
ECS Engineers have spent countless hours in the development of the exclusive B9 A4 2.0T Kohlefaser Luft-Technik Intake System. This intake was precision engineered using state of the art laser scanning, dyno testing, and 3D CAD technology to combine factory-like fitment in your engine bay with increased engine performance.
This intake has been subjected to rigorous real world testing with verified performance gains on our in-house chassis dyno resulting in an increase of 11WHP and 10WTQ with the factory tune and 5 WHP and 9 WTQ when combined with the APR Stage 1 ECU Upgrade.
The ECS Tuning Kohlefaser Luft-Technik Intake System features:
- Specifically crafted to fit B9 A4 2.0T engines using all stock mounting locations
- Carbon Fiber lid, carefully contoured to allow the smoothest flow path
- 4-ply silicone turbo inlet to hinder collapsing
- Powder Coated aluminum heat shield
- Brushed secondary 5052 aluminum heat shield
- 3" conical hi-flow reusable air filter; featuring 8 ply cotton gauze construction and a bell mouth inlet to minimize restriction while maximizing filtration efficiency
- Stainless steel hardware & hose clamps for exceptional corrosion resistance and durability
- Broader and smoother torque curve for an enhanced driving experience
- Gains of +11 WHP / +10 FT-LBS WTQ with the factory tune
- Gains of +5 WHP / +9 FT-LBS WTQ on APR Stage 1 ECU Upgrade
- No modifications required, fully reversible installation
- Complete install instructions provided!
Take a deep breath
Click HERE to order or for more information
Be sure to check out our -----> installation PDF <-----
Let me know if you have any questions.
Jason
#4
AudiWorld Member
Will this fit a B9 S4? I'd like to be able to transfer it over if I purchase a S4 in a year or two.
Now the CF ecu cover makes sense. CF on both sides of the engine bay looks good. All you need to do is produce a CF engine cover and the engine bay will be complete.
Now the CF ecu cover makes sense. CF on both sides of the engine bay looks good. All you need to do is produce a CF engine cover and the engine bay will be complete.
Last edited by up-n-coming; 04-19-2017 at 03:11 PM.
#5
Audiworld Basic Sponsor
Thread Starter
We haven't test fit this on a B9 S4 yet. Some parts may be similar but won't beable to confirm until our B9 S4 shows up.
We do plan to have an intake specifically for S4 though.
Jason
We do plan to have an intake specifically for S4 though.
Jason
Trending Topics
#9
Audiworld Basic Sponsor
Thread Starter
Jason