Econ mode stuck - G65 sensor are changed
06-15-2019, 11:04 AM
#1
AudiWorld Newcomer
Thread Starter
Join Date: Jun 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Econ mode stuck - G65 sensor are changed
Hi i have problem with my car audi a4 2004.
I have error code high pressure sensor g65, it is changed to a new one. but the error code is still there.
I have erased the error code several times after I changed the sensor to a new.
It is 12volt in two pins and 0 volt in the three pin.
What should it be in the 3 pin? What more can i do? Know any ohm values in high pressure sensor?
I have gas in the system and ac goes around. Econ mode is constantly lit. (Econ mode are in stuck mode.)
Sorry for bad english.
I have error code high pressure sensor g65, it is changed to a new one. but the error code is still there.
I have erased the error code several times after I changed the sensor to a new.
It is 12volt in two pins and 0 volt in the three pin.
What should it be in the 3 pin? What more can i do? Know any ohm values in high pressure sensor?
I have gas in the system and ac goes around. Econ mode is constantly lit. (Econ mode are in stuck mode.)
Sorry for bad english.
Thread
Thread Starter
Forum
Replies
Last Post
Push That Tush
A4 (B6 Platform) Discussion
1
07-24-2009 12:59 PM
bsherwoo
A4 (B6 Platform) Discussion
7
08-01-2008 09:34 AM
PMrider
S4 (B6 & B7 Platforms) Discussion
1
09-02-2007 05:30 AM
PMrider
S4 (B6 & B7 Platforms) Discussion
1
09-02-2007 05:11 AM
