When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Has anyone ever tried the top view camera calibration on their car?
I saw a lot of rear camera only calibration but nowhere the top view.
I have search a lot in many forums but absolutely nothing...
I have retrofitted the top view and all is working but module is throwing errors because of no calibration.
I have printed out the calibration sheet, and got OBDEleven pro app.
I can see the basic settings but have no clue on what to do...
There is nothing relevant on the adaptation section...
Can only be done with ODIS with the right calibration boards etc. Mine shows similar errors but works perfectly fine. Unless the display i sway off i would leave it.
Can only be done with ODIS with the right calibration boards etc. Mine shows similar errors but works perfectly fine. Unless the display i sway off i would leave it.
Thanks Morski. I already printed the calibration board. I will try to find a way to do this calibration using VCP...
Thanks Morski. I already printed the calibration board. I will try to find a way to do this calibration using VCP...
you can print the calibration board? Where do you get it to print it? The top view board setup is a little different from the rear view camera set up because it has 2 additional boards that attach vertically to the rear view board setup. Not sure how you would rig that up with paper you just printed unless you attached it to some cardboard or something. We run into calibration issues at the dealer all the time due to glare/reflections, I wonder if I overlaid it with a printed copy if that would resolve this.
07-17-2018, 02:28 AM
Has anyone ever tried the top view calibration?
