Steering angle sensor calibration issues with Vag com
#1
AudiWorld Member
Thread Starter
Join Date: Mar 2006
Location: Ashland, MA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Steering angle sensor calibration issues with Vag com
Ok I've searched the forum and read the how to on Rosstechs website. For the life of me I can not get it to calibrate. I have set the WSC to the last service station that was listed in the abs computer. The procedure on Vag com's website is pretty vague and I must be doing something wrong to not be able to calibrate it. I turn the wheel from the straight position to the right one full turn, then turn one for turn back to center.... I procede to drive about 100ft in a straight line, and then log in to vagcom and try to set the center position, but instead I get an error message stating that the steering angle sensor is not ready or something along those lines. What am I doing wrong?
#3
Friend of mine just went through this and was unable to solve the problem.
If you find a solution, please post and/or email me.
You aren't doing anything wrong, but there is some sort of trick.
You aren't doing anything wrong, but there is some sort of trick.
Thread
Thread Starter
Forum
Replies
Last Post
slickn
VAG-COM Discussion
1
06-20-2008 05:10 AM
4Bidden
S4 / RS4 (B5 Platform) Discussion
11
01-19-2006 01:17 PM