Anybody knows about camber angle for S6?
#1
Audiworld Junior Member
Thread Starter
Join Date: Oct 2006
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Anybody knows about camber angle for S6?
Wut is the proper angle ?
and is there any problem to quattro system with making more negative angle on Camber ?
THanks
and is there any problem to quattro system with making more negative angle on Camber ?
THanks
#3
Can you clarify the eccentric inserts please? Will this help me get some..
level of adjustment out of the front end?
I'm having less-than-stellar inner tread tire wear up front and anything I can do to lessen this problem is of interest to me.
I know, the "I told you so" crowd will say don't lower it, you won't have this problem. That's not my style so I need a better solution to my front end alignment issue.
Thank you kindly.
I'm having less-than-stellar inner tread tire wear up front and anything I can do to lessen this problem is of interest to me.
I know, the "I told you so" crowd will say don't lower it, you won't have this problem. That's not my style so I need a better solution to my front end alignment issue.
Thank you kindly.
#4
Re: Can you clarify the eccentric inserts please? Will this help me get some..
Sounds like you are enjoying a good improvement in Negative Camber....what's the problem? My outsides are hammered from too much push.....one way or another, with a car like the S6, as heavy as it is and w/ Quattro, the fronts are gonna get hurt, i driven as the designers intended. Tires are a wear item, and any more than 15K means that you should sell it and buy a Hona Accord.
JM
LA, Ca
JM
LA, Ca
#5
Re: Can you clarify the eccentric inserts please? Will this help me get some..
I used K-MAC Eccentric Adjuster kit. It lets you dial in both camber and add positive caster. My car feels alot better on and off center with a little more positive caster. Best mod I have done!
I have a spare kit already installed in OEM upper control arms with ball joints if you do not want to install them in your Control Arms.
www.kmac.com
I have a spare kit already installed in OEM upper control arms with ball joints if you do not want to install them in your Control Arms.
www.kmac.com
#6
Audiworld Junior Member
Thread Starter
Join Date: Oct 2006
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can you clarify the eccentric inserts please? Will this help me get some..
hmm AUdism i am still trying to making ma car lowered and inch up the wheels without rubbing ..BUT ! ..I adjusted ma Rear wheels camber ( Make more nagative .. I heard AUdi s6 has nagative angle already) After that it looks better ( i mean more space..) I am not sure it hurt the quattro or not though ,,,^^
THanks for everytime
THanks for everytime
Thread
Thread Starter
Forum
Replies
Last Post
A4_Jax
A4 (B6 Platform) Discussion
34
10-01-2007 09:27 PM