When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
No faults or malfunctions on dash, but the outer lights are now working on low beam. Only on high beam. What can it be, and how to fix it? Any schemes?
I was hoping to find a way to turn those outer lights on and off. I live in South Florida and its so well lit at night you can practically get away with just day running lights.
That's really odd. You should be getting an error on Output Module 1 (labeled # 15 in the diagram) if the outermost light is out. High beams and cornering is handled by Output Module 2 (labeled #16). Output Module 3 (labeled #19) handles the DRLs.
This is what it looks like underneath the headlight, should you get adventurous.
Last edited by SpectreGadget; 01-29-2019 at 01:56 AM.
That's really odd. You should be getting an error on Output Module 1 (labeled # 15 in the diagram) if the outermost light is out. High beams and cornering is handled by Output Module 2 (labeled #16). Output Module 3 (labeled #19) handles the DRLs.
This is what it looks like underneath the headlight, should you get adventurous.
Hi, I want to replace the Output Module 2. Can you tell me the procedures? Do I have to remove the headlight? Thanks in advance!
Jirong
11-06-2018, 10:15 AM
Full led , outer leds not working on low beam?
