A8 / S8 (D2 Platform) Discussion Discussion forum for the D2 Audi A8 and S8 produced from 1994-2002
Sponsored by:
Sponsored by:

Transmission swap?

Thread Tools
 
Search this Thread
 
Old 03-05-2006, 02:25 PM
  #1  
New Member
Thread Starter
 
Paul42q's Avatar
 
Join Date: Dec 2005
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Transmission swap?

Hi guys,
I may have access to a low mileage 2002 transmission from a 4.2Q, I'm thinking of installing this and the TC into my 1997 4.2Q which has a transmission that hunts a bit (both euro spec) Is it a sraight swap, plug and play type deal, or will there be any electrical connection issues etc?? All advice greatly appreciated

Paul N
Old 03-05-2006, 03:31 PM
  #2  
AudiWorld Super User
 
tozoM8's Avatar
 
Join Date: Sep 2004
Posts: 6,706
Likes: 0
Received 5 Likes on 4 Posts
Default It is a bolt on deal. Only the transmission range switch F125 has a different plug, but

you can use your old switch. Be careful when you put the TC on the tranny.
Old 03-06-2006, 04:47 PM
  #3  
AudiWorld Senior Member
 
FCSC's Avatar
 
Join Date: Jul 2005
Location: Darien, CT
Posts: 756
Likes: 0
Received 0 Likes on 0 Posts
Default anyone know if you can switch it to manual... since you can already spend up to 3k would it be much

more?
Old 03-06-2006, 05:07 PM
  #4  
AudiWorld Super User
 
tozoM8's Avatar
 
Join Date: Sep 2004
Posts: 6,706
Likes: 0
Received 5 Likes on 4 Posts
Default

It took me like 120 hours and less than $2000.
Old 03-06-2006, 05:52 PM
  #5  
AudiWorld Senior Member
 
FCSC's Avatar
 
Join Date: Jul 2005
Location: Darien, CT
Posts: 756
Likes: 0
Received 0 Likes on 0 Posts
Default oh wow, thats amazing... I dont think i'd be able to do it myself though unfortunatly, i'm

mechanicly inclined, but don't know enough or have the expereince unfortunatly. if it took you 120 hours.. that would be $7,200 at 60 an hour for a mechanic, ugh.

How hard would you say the job was?
Old 03-06-2006, 07:15 PM
  #6  
AudiWorld Super User
 
tozoM8's Avatar
 
Join Date: Sep 2004
Posts: 6,706
Likes: 0
Received 5 Likes on 4 Posts
Default You need to have access to a machine shop, because parts are not available.

You need to have access to a lift too for a few days. it is hard to do without it. I was fortunate enough to fabricate all the parts myself, keeping the cost down.<ul><li><a href="https://forums.audiworld.com/a8/msgs/105016.phtml">https://forums.audiworld.com/a8/msgs/105016.phtml</a</li></ul>
Old 03-07-2006, 03:27 AM
  #7  
New Member
Thread Starter
 
Paul42q's Avatar
 
Join Date: Dec 2005
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: It took me like 120 hours and less than $2000.

Have you thought about doing a write up and manufacturing the parts needed for this to sell?, I for one would pay good money for the parts to finish this conversion and there must be others!!

Excellent job!

Paul
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pchelka01
A8 / S8 (D2 Platform) Discussion
3
06-10-2011 07:39 PM
dragon-ryder
Audi 90 / 80 / Coupe quattro / Cabriolet
12
05-22-2007 04:07 PM
d_maniac
A4 (B5 Platform) Discussion
7
05-21-2007 05:49 PM
marcodant
A8 / S8 (D2 Platform) Discussion
9
06-11-2005 04:39 AM
NJ4.2GUY
A6 / S6 (C5 Platform) Discussion
10
07-08-2004 06:57 PM



Quick Reply: Transmission swap?



All times are GMT -8. The time now is 04:36 AM.