Bi-xenon high beam shutter inop...no hi beam
#1
AudiWorld Senior Member
Thread Starter
Bi-xenon high beam shutter inop...no hi beam
What could cause that condition ? I had no AFS features working in this headlight because much of the insulation was gone and wires were touching. I fixed the wiring mess and got side-to-side motion and side illuminating turning lights working again and no warning light for 'range'. It never occurred to me to check high beams either before I removed the lights to polish and rewire, or after when I checked those other functions. So the highbeam could have been out for sometime; just not the easy to tell if youre not looking for it. And thats a bummer because I could maybe have fixed the high beam too if I knew what was wrong.
Bumper was back on before I made the discovery, so repair will have to wait till I feel like doing another bumper R&R but I need to know what the fix is...
Bumper was back on before I made the discovery, so repair will have to wait till I feel like doing another bumper R&R but I need to know what the fix is...
Thread
Thread Starter
Forum
Replies
Last Post
aerohr
Audi 5000 / 200 / V8 Discussion
14
12-02-2004 07:16 PM
Audi[VW]EuRo_StYLe]
Audi 4000 / Coupe GT Discussion
2
11-03-2002 08:12 PM
Audi[VW]EuRo_StYLe]
Audi 4000 / Coupe GT Discussion
7
10-16-2002 04:23 AM