Anybody know what's up with the 12v.org site? Also, has anyone actually installed and/or can
08-19-2002, 07:52 PM
#2
Re: Anybody know what's up with the 12v.org site? Also, has anyone actually installed and/or can
I'm going to look into seeing of the UUC shifter will fit the older 01A's in the CQ and B4q. But, that won't happen until November when the other roommate with the A4 1.8tq gets the UUC for his bday. If you can wait, I'll be letting the forum and 20v list know the outcome. Otherwise, theres the Billzcat modified Benno shifter, and the DIY Benno shifter that both I and Miktip posted directions on how to make.
Nothing like looking out your window and seeing two K-series turbos, 62 valves, three torsens, and a "locker"...
Nothing like looking out your window and seeing two K-series turbos, 62 valves, three torsens, and a "locker"...
08-20-2002, 01:22 AM
#3
Re: I "searched" this forum and lookee what I found! ;o)
<ul><li><a href="https://forums.audiworld.com/9080/msgs/31364.phtml">https://forums.audiworld.com/9080/msgs/31364.phtml</a</li></ul>
08-20-2002, 07:14 AM
#4
Junior Member
Thread Starter
Join Date: Feb 2002
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
Re: I "searched" this forum and lookee what I found! ;o) -- Thanks MikTip -- I found that as well.
I generally search the forum automatically. I was testing the waters to see if there was anything new around. I probably should have indicated that I was looking for anything other than what's been posted in the past. Those short shift kits are still being sold on ebay (Billzcat) but they're a bit expensive and you gotta wait for the auction to end, etc.
08-20-2002, 11:51 AM
#5
Re: bit expensive and you gotta wait for the auction to end? No ya dont! :o)
All you need is these parts! ;o)
Shift Pivot Assembly official name: Bearing for gearshift lever, VW PN: 171-711-247. You will need to modify this piece. There are two mounting holes which nearly line up with the mounting hole on the car (see notes below)
2. Pressure Spring, VW PN: 823-711-197 A
3. Washer VW PN: N-011-547-6
& can make your own! Its what I did! ;o)
Shift Pivot Assembly official name: Bearing for gearshift lever, VW PN: 171-711-247. You will need to modify this piece. There are two mounting holes which nearly line up with the mounting hole on the car (see notes below)
2. Pressure Spring, VW PN: 823-711-197 A
3. Washer VW PN: N-011-547-6
& can make your own! Its what I did! ;o)
Thread
Thread Starter
Forum
Replies
Last Post
DMY 2.7T
A6 / S6 (C5 Platform) Discussion
8
01-17-2001 01:05 PM
s-four
S4 / RS4 (B5 Platform) Discussion
11
03-17-2000 04:54 AM
Peter L
S4 / RS4 (B5 Platform) Discussion
0
02-29-2000 05:37 PM
BBS
A4 (B5 Platform) Discussion
1
01-14-2000 07:41 AM