Automatic starter
12-20-2016, 05:36 AM
#1
AudiWorld Newcomer
Thread Starter
Join Date: Feb 2016
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Automatic starter
I had an automatic starter installed on my A5 yesterday. It was a difficult install as is anything aftermarket on Audi. The engineer of Compustar actually stepped in and finalized the install after 7 tedious hours of installation with a local car and audio source.
My problem today is once the car turns over with the automatic starter, the heater and seats default back to 1. I set it on 12 and then shut down the vehicle, but upon every start it defaults to 1. It barely throws heat on that setting making the starter somewhat useless.
Is there anyway to program or bypass the system to prevent the default to 1 and basically stay on the highest setting?
My problem today is once the car turns over with the automatic starter, the heater and seats default back to 1. I set it on 12 and then shut down the vehicle, but upon every start it defaults to 1. It barely throws heat on that setting making the starter somewhat useless.
Is there anyway to program or bypass the system to prevent the default to 1 and basically stay on the highest setting?
04-27-2017, 06:13 PM
#2
Audiworld Junior Member
Join Date: Sep 2016
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
did u ever get this resolved I'm doing my compustar alarm & r start soon along wit system did u use directed bypass d-ball all or ads altb you can see some of my jobs and progress on car
Thread
Thread Starter
Forum
Replies
Last Post
miamidolphinsgrey
A4 (B6 Platform) Discussion
0
06-09-2002 06:49 PM
AznAir23
S4 / RS4 (B5 Platform) Discussion
3
05-22-2002 04:59 PM