Black Optic-ing an e-tron in US? (i.e. Mods)
#11
The following 2 users liked this post by sor:
calbear92 (10-28-2020),
Louis Samson (10-29-2020)
The following 4 users liked this post by Louis Samson:
The following users liked this post:
calbear92 (10-29-2020)
The following users liked this post:
calbear92 (10-30-2020)
The following users liked this post:
wsrobert (01-05-2021)
#16
#17
Combination of angle and a very bright day when wifey took the pic, but it's actually tinted 35% all around, which is the darkest you can go around these parts legally with a sunshading waiver.
The following users liked this post:
thebishman (11-01-2020)
#18
Well, I swapped the grille myself, and it’s not for the faint of heart! You have to peel off the fender flares to expose some screws, there is some tubing connecting from the headlights to the lower front bumper vents that immediately comes apart when the bumper is removed, wires everywhere and even when you get the bumper off there are layers of plastic framing you have to disassemble with maybe 30 screws to access the clips to remove the grille. It took me a good 2.5 hrs to get it all figured out, replace the grille, and reassemble. Had I known how tough it would be I might not have bothered, but the end result looks great.
Waiting on rear rings and “e-tron” in black. I’ve also got the black splitter to put on the rear bumper but I’m not sure I’ll bother!
Waiting on rear rings and “e-tron” in black. I’ve also got the black splitter to put on the rear bumper but I’m not sure I’ll bother!
The following 3 users liked this post by sor:
#20
Audiworld Basic Sponsor