Anybody try using a VR6 throttle body and the adapter from 034?
#4
This is for people doing "ghetto" 20vt projects.
Meaning people who are making a 20vt engine with an NG(10v NA) block with a 7a (20v NA) head. It's cheaper for them to find a used VR6 throttle body and use the adapter to make it bolt to a 3B (20vt) or AAN intake manifold. My 20vt project is going to use a genuine AAN throttle body.
In short, this is not an upgrade. A person with a Urs4/Urs6/'91 200 would have no use for it. IIRC, it has a smaller diameter than stock, so a downgrade. If you want a bigger TB, go with 034's 70mm upgrade service for your current TB. However, unless you plan some RS2+ power levels it's not really too beneficial IMO.
In short, this is not an upgrade. A person with a Urs4/Urs6/'91 200 would have no use for it. IIRC, it has a smaller diameter than stock, so a downgrade. If you want a bigger TB, go with 034's 70mm upgrade service for your current TB. However, unless you plan some RS2+ power levels it's not really too beneficial IMO.
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning-Audi
TT (Mk2) Discussion
0
04-02-2018 09:04 AM
Only-Emre
Audi Original "S" Cars
11
05-12-2006 10:17 PM
ArTT Vandelay
A4 (B5 Platform) Discussion
2
12-29-2001 04:49 PM
Albert
A4 (B5 Platform) Discussion
1
11-17-1998 10:44 PM