I just hate my S6 right now...sorry, I need to get that off my chest
11-22-2006, 04:30 PM
#1
AudiWorld Senior Member
Thread Starter
Join Date: Apr 2003
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
I just hate my S6 right now...sorry, I need to get that off my chest
Worked from yesterday afternoon straight through the night until this afternoon with wiring the stand alone/installing VR bracket and sensor/1.8t intake temp sensor, and no start...I am so frustrated right now it is unbelievable
thanks for listening
thanks for listening
11-22-2006, 04:41 PM
#4
AudiWorld Senior Member
Thread Starter
Join Date: Apr 2003
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
I am trying to connect my ECU to my computer right now, and I am realizing...
I need a serial to USB cable, fun fun fun
So, that wire is ground supposedly....
So, that wire is ground supposedly....
Trending Topics
11-22-2006, 05:18 PM
#8
AudiWorld Senior Member
Join Date: Dec 2003
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
not very likely
it takes a lot to burn up the ecu. Its possible to burn things like coil drivers and injector drivers, but pretty damn tough to break the actual ECU itself.
If you really, really want to know if you can talk to the ECU, take it to a desktop PC with a real serial port, rig up a battery and connect it directly to the power connector on the ecu and verify communication over the serial port with the windows software.
If you really, really want to know if you can talk to the ECU, take it to a desktop PC with a real serial port, rig up a battery and connect it directly to the power connector on the ecu and verify communication over the serial port with the windows software.