RE: Front suspension rebuild is completed....
#1
RE: Front suspension rebuild is completed....
Now need POS's to start her up and do alignment.
PS: I remembered that prior to this project car had a noticeble clunk when in reverse/1st and clutch is ingaging. What other components besides Center Bearing(driveshaft) need to looked at/replaced. Also Bentley mentioned an alignment fixture 3139 to be used when driveshaft is removed. Is there a universal tool or can be done without it.
PS: I remembered that prior to this project car had a noticeble clunk when in reverse/1st and clutch is ingaging. What other components besides Center Bearing(driveshaft) need to looked at/replaced. Also Bentley mentioned an alignment fixture 3139 to be used when driveshaft is removed. Is there a universal tool or can be done without it.
Thread
Thread Starter
Forum
Replies
Last Post
Audi_in_Van
S4 / RS4 (B5 Platform) Discussion
4
07-16-2007 11:38 PM
Jeremy Clarkson
S4 / RS4 (B5 Platform) Discussion
3
05-16-2002 03:06 PM
Andy Hedin
A4 (B5 Platform) Discussion
13
04-26-1999 01:51 PM