correct process
AudiWorld Super User
Joined: May 2000
Posts: 21,112
Likes: 1
That's about it.
I started with a wash with Dawn to strip wax and really make sure that everything was clean (all the panel seems and such). Then the clay magic. This step took a little over 2 hrs but 1 hr alone on the back bumper, the rest goes quicker. Make sure you use lots of lube. I used the entire spray bottle that came with it and some leftover Mothers detailing spray. You can substitute water with soap in it as a lube as well. After the clay I washed again with normal car wash soap to get all of the clay/detailer residue off.
Then the polish and wax. You may need to wait a day between coats of wax. Some types of wax say that you shouldn't apply another coat immediately.
Oh yeah, and one final step... post pics!! Everyone likes to see clean shiny TTs
Then the polish and wax. You may need to wait a day between coats of wax. Some types of wax say that you shouldn't apply another coat immediately.
Oh yeah, and one final step... post pics!! Everyone likes to see clean shiny TTs
Thread
Thread Starter
Forum
Replies
Last Post
DolphinAvant
Auto Detailing Discussion
13
Sep 21, 2002 04:24 PM
francisk
A4 (B5 Platform) Discussion
13
Apr 3, 2002 01:35 PM
