While I'm posting pics, here's my new sunroof......
#1
While I'm posting pics, here's my new sunroof......
Or lack thereof. ;-P
Here's the welding.....
<img src="http://pictureposter.audiworld.com/54525/dsc01151.jpg">
And here it is smoothed out, & painted, to prevent rust until the final paint.
<img src="http://pictureposter.audiworld.com/54525/dsc01153.jpg">
For those that know, zoom in on the defrost vent, on the dash that's laying on the trunklid. ;-P ROFLMAO
Here's the welding.....
<img src="http://pictureposter.audiworld.com/54525/dsc01151.jpg">
And here it is smoothed out, & painted, to prevent rust until the final paint.
<img src="http://pictureposter.audiworld.com/54525/dsc01153.jpg">
For those that know, zoom in on the defrost vent, on the dash that's laying on the trunklid. ;-P ROFLMAO
#4
Ok, but someone better photochop some flames in for me ;-P
<img src="http://pictureposter.audiworld.com/54525/dsc01158.jpg">
<img src="http://pictureposter.audiworld.com/54525/dsc01159.jpg">
<img src="http://pictureposter.audiworld.com/54525/dsc01159.jpg">
#5
Um.....sunroof hole in roof needs to be.....structural. Carbon fiber.......isn't.....well,
not as good as steel, and when it comes to the driver compartment, I think I want something more solid than cf.
That, and steel was much easier.
That, and steel was much easier.
Trending Topics
#10
CF is much harder to make, but is better than steel if applied correctly
it has huge tensile strength and using different laminae directions in the laminate you can achieve near isotropic properties if desired, but unlike steel you can achieve couplings like extension - bending coupling which can be very cool
but for this...yes steel is better :-)
but for this...yes steel is better :-)
Thread
Thread Starter
Forum
Replies
Last Post
Herr Schröder
Audi 5000 / 200 / V8 Discussion
2
05-13-2007 07:21 PM
Aman_UnatrlyAspiratd
Canadian Discussion
4
07-27-2006 02:05 PM
HeveyS4
S4 / RS4 (B5 Platform) Discussion
17
03-08-2006 05:33 AM
Fraser@PNS now w/S6
Chicago Discussion
36
02-15-2005 06:12 AM