Mark this thread as Unsold
Audi Other 4 Pin Ignition Coil Connectors & Boots (2.0t, 3.0sc, 4.2, etc)
#1
AudiWorld Newcomer
Thread Starter
Join Date: Jan 2018
Location: PA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
4 Pin Ignition Coil Connectors & Boots (2.0t, 3.0sc, 4.2, etc)
In the process of making conversion harnesses to run 2.0t coils on my B5 V6 , I ended up with a plethora of 4 Pin ignition coil repair kits.
These 4 pin plugs fit a wide range of VAG vehicles in various positions, ditto with the boots. They'll fit on any 4 pin connector and likely stretch to some 5 pin.
I'd like to make them available to the community as these are a commonly damaged connector, perhaps one of the most frequent.
1 connector housing w/ terminal retainer and seal
4 terminals and wire seals per housing.
$3 for a single
$10 for 4
$15 for 6
$20 for 8
Additionally,
The rubber boots for these plugs to tidy the wiring harness are now available. (needed some of those for my projects too)
$1.75 each
Shipping within USA:
$6.70 for USPS flat rate envelope,
$7.00 for flat rate box** (most orders will fit in the envelope, ~10+ will push them into a box.)
Located in 18942 PA, Pickup is available for locals to save shipping cost.
Thanks,
Matt
These 4 pin plugs fit a wide range of VAG vehicles in various positions, ditto with the boots. They'll fit on any 4 pin connector and likely stretch to some 5 pin.
I'd like to make them available to the community as these are a commonly damaged connector, perhaps one of the most frequent.
1 connector housing w/ terminal retainer and seal
4 terminals and wire seals per housing.
$3 for a single
$10 for 4
$15 for 6
$20 for 8
Additionally,
The rubber boots for these plugs to tidy the wiring harness are now available. (needed some of those for my projects too)
$1.75 each
Shipping within USA:
$6.70 for USPS flat rate envelope,
$7.00 for flat rate box** (most orders will fit in the envelope, ~10+ will push them into a box.)
Located in 18942 PA, Pickup is available for locals to save shipping cost.
Thanks,
Matt
#2
AudiWorld Newcomer
Thread Starter
Join Date: Jan 2018
Location: PA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Incoming this week will be:
EV1 connectors (standard square 2 pin) and corresponding boots for 2 pin connectors.
Also got a few pairs of crimping pliers if anyone is in need.
-matt
EV1 connectors (standard square 2 pin) and corresponding boots for 2 pin connectors.
Also got a few pairs of crimping pliers if anyone is in need.
-matt
#4
AudiWorld Newcomer
Thread Starter
Join Date: Jan 2018
Location: PA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
also arriving:
2 Pin Connector - 1J0 973 702
2 Pin Connector - 1J0 973 722
These are the two most prevalent vw/audi 2 pin connectors, they go all over the place and theyre always getting damaged
2 Pin Connector - 1J0 973 702
2 Pin Connector - 1J0 973 722
These are the two most prevalent vw/audi 2 pin connectors, they go all over the place and theyre always getting damaged
#5
AudiWorld Newcomer
Thread Starter
Join Date: Jan 2018
Location: PA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I also have a couple other handy connectors that get busted up pretty frequently:
1J0 973 702 w/ terminals and seals
$1.95 ea
1J0 973 722 w/ terminals and seals
$1.95 ea
EV1 Connector w/ terminals
$1.85 ea
Rubber boots shown on the latter two connectors
$1.65 ea
They do fit the 702 connector, but it is a narrower neck so it is not tight or sealed.
Any questions, requests or otherwise feel free to post or message me!
1J0 973 702 w/ terminals and seals
$1.95 ea
1J0 973 722 w/ terminals and seals
$1.95 ea
EV1 Connector w/ terminals
$1.85 ea
Rubber boots shown on the latter two connectors
$1.65 ea
They do fit the 702 connector, but it is a narrower neck so it is not tight or sealed.
Any questions, requests or otherwise feel free to post or message me!
Thread
Thread Starter
Forum
Replies
Last Post
deephouse
Audi Original "S" Cars
5
12-16-2008 05:19 PM
litay
Audi 90 / 80 / Coupe quattro / Cabriolet
2
09-13-2005 03:07 PM
nanotech
A4 (B5 Platform) Discussion
8
08-15-2002 04:06 PM