<center><img src="http://pictureposter.audiworld.com/19251/imgp0249.jpg"></center><p>I didnt write down the whole explanation, but something about a bank being too lean..
Lately I have had problems when I am starting up my car.. I have to let it idle for a few mintues before driving, and even then it sometimes stalls. It also seems to take forever to build up boost.
Oh, its a 98 1.8T A4 Stage 3 with the usual supporting mods

Pic for views!

 

what do your o2 sensor #'s look like

 

I will take a look at them tonight...

 

also check maf readings.

 

That will give you an idea of where to look. If its way + in the first field its at idle so that means a vacum leak. If its + in the second field then its most likely a MAF..

The slow to build boost could be from the bad maf on a cable throttle 1.8t, or a boost leak, however a boost leak usually would be rich.

 

Here are the results.. Any help is appreicated,as I dont really know how to read these things, or know what to look for. On a quick look over, i didnt notice any vacuum hose leaks, but it was a quick glance, and the engine was warm..

Wednesday,06,July,2005,16:59:27

8D0 907 557 P ,,1.8L R4/5VT MOTR HS D07,

,Group A:,'002,,,,Group B:,'001,,,,Group C:,'015

,,Engine,Engine,Fuel Injectors,Air,,Engine,Coolant,O2 Sensor,Adjustment,,Misfires
Harmful,Misfires Harmful,Misfires Harmful,Misfire

,TIME,Speed,Load,Average Time,Mass
Flow,TIME,Speed,Temperature,Control,Conditions,TIM E,to Emiss Cyl 1,to Emiss Cyl 2,to
Emiss Cyl 3,Recog

MARKER,STAMP, /min, ms, ms, g/s,STAMP, /min,°C,%,,STAMP,,,,

,0.47,3240,4.10,7.23,59.93,0.74,3320,82.5,0.0, 000001,0.21,0,0,0,Enabled

,1.26,3480,5.00,9.34,78.26,1.53,3560,82.5,0.0, 000001,1.00,0,0,0,Enabled

,2.07,3760,6.15,12.29,103.54,2.34,3840,82.5,0.0, 000001,1.80,0,0,0,Enabled

,2.89,4040,6.80,12.93,123.40,3.16,4160,82.5,0.0, 000001,2.61,0,0,0,Enabled

,3.70,4400,6.80,13.06,135.07,3.97,4520,82.5,0.0, 000001,3.43,0,0,0,Enabled

,4.52,4760,6.85,13.63,146.87,4.80,4840,82.5,0.0, 000001,4.24,0,0,0,Enabled

,5.35,5080,6.85,14.02,155.62,5.62,5200,82.5,0.0, 000001,5.08,0,0,0,Enabled

,6.21,5400,6.55,14.53,158.96,6.48,5480,82.5,0.0, 000001,5.92,0,0,0,Enabled

,7.04,5720,6.35,14.98,163.96,7.30,5760,82.5,0.0, 000001,6.77,0,0,0,Enabled

,7.83,5960,5.70,13.18,152.64,8.09,6040,82.5,0.0, 000001,7.56,0,0,0,Enabled

,8.62,6160,5.40,12.54,150.34,8.88,6240,84.0,0.0, 000001,8.35,0,0,0,Enabled

,9.40,5920,0.90,1.79,24.44,9.66,5440,84.0,0.0, 010001,9.14,0,0,0,Enabled

,10.18,4440,1.05,2.11,21.04,10.44,4400,84.0,0.0, 010001,9.92,0,0,0,Disabled

1,10.97,4320,0.45,0.00,9.09,11.51,4280,84.0,0.0, 010001,10.70,0,0,0,Disabled

,12.05,4200,0.40,0.00,7.98,12.33,4160,84.0,0.0, 010001,11.78,0,0,0,Disabled

Any help is appreciated!

 

I currently only have the shareware version, but wil get my buddy with the full to help tommorow

 

I got that code due to a dead MAF, also got a CEL out of it.

 

2nd on the dead maf...no CEL here

 

Replaced ther MAF, and it runs fine now! Thx