urS4guy

Well guys, I thought I'd pass along an update on the installation of my AEM EMS. Things are progressing rapidly towards a delivery sometime next week. Since AEM does not make a plug and play version for the AAN, like Joey P. has, there is a lot of custom wiring which included the complete removal of the stock wiring harness. Doing the wrenching and wiring is my good friend Dave Jones of 3R Racing in Denver. He's using all gold connectors and has installed a cannon plug at the firewall to allow quick disconnect for future upgrading ;-) Here are a few pics.

2 Pics of the new harness...

<img src="http://pictureposter.audiworld.com/15038/img_1812.jpg">
<img src="http://pictureposter.audiworld.com/15038/img_1813.jpg">

The stock harness...

<img src="http://pictureposter.audiworld.com/15038/img_1814.jpg">

Hey, where's my POSs and connectors???

<img src="http://pictureposter.audiworld.com/15038/img_1815.jpg">

This should be the first AAN with an AEM EMS running things. Some of the features will include launch control where I can just hold the gas pedal down and the AEM will hold any preselected rpm with 0 mph. It also allows for flat footed shifting and I again hold the gas pedal down while shifting and it holds some boost and a specified rpm. This thing is going to rock!

Hap, wit dakine AEM EMS stuff from Evahboost

A400

Well good luck Hap,why did you go this way when 8-900hp is available with motronic SW which you can purchase? Has Dave become as good on AEM as he was on the motronic stuff, hehe?
Rod

urS4guy

Rod, you need to get over it...

A400

But having slung this huge glob of mud, I will refrain from judt and due payback in the future.
Rod

fusilier

I was wondering when you would move off of Motronic.

AntiSocial

I'll hold the pink slips.

A400

Hap is a nice guy and I dont need his car.

urS4guy

I think not having to deal with the limitations of a MAF and the very cool features is what got me to make the move.

Hap, wit dakine AEM thoughts from Evahboost