matte black emblems
Thread Starter
AudiWorld Member
Joined: Nov 2012
Posts: 199
Likes: 0
From: Bay Area
matte black emblems
So I purchased Matte Black emblems for my wife for christmas from Parts4Euro.com. We were HIGHLY disappointed with the product, ended up being too small, didnt fit our grill, we have a 2010 Q5. I will admit I wasnt 100% sure how Parts4Euro measured their product, but they had the emblems listed as fitting a Q5. Anyways, the quality is also VERY sub par. They state on their FB page they have only high quality OEM parts, that statement is far from true! When you hold the emblems compared to the factory emblems they are very cheap feeling and sounding.
Anyways, does anyone out there have a good place to pick up matte black emblems? I have seen different links about painting them, using Plasti Dip and a few other things. I would prefer to just swap out emblems and keep the factory ones just in case I need to change them back. I am not too worried about price, I dont want to pay an arm and a leg, but I do want a quality part. Any suggestions on where to find quality Audi aftermarket parts would be greatly appreciated.
This was the first step to changing parts on the Q5 to make her look like we want. And any help in sure I get quality parts would be greatly appreciated. Needless to say Parts4Euro is no longer on my list of places to buy parts.
Hope Everyone had a Merry Christmas!
Anyways, does anyone out there have a good place to pick up matte black emblems? I have seen different links about painting them, using Plasti Dip and a few other things. I would prefer to just swap out emblems and keep the factory ones just in case I need to change them back. I am not too worried about price, I dont want to pay an arm and a leg, but I do want a quality part. Any suggestions on where to find quality Audi aftermarket parts would be greatly appreciated.
This was the first step to changing parts on the Q5 to make her look like we want. And any help in sure I get quality parts would be greatly appreciated. Needless to say Parts4Euro is no longer on my list of places to buy parts.
Hope Everyone had a Merry Christmas!
AudiWorld Senior Member
Joined: Dec 2011
Posts: 935
Likes: 0
From: New England
I second Plasti Dip. Easy to apply, and if you want to trade in the car you can easily get ahold of OEM emblems to put back on. (that way you don't have to keep track of where you stored them for 3 years until you trade it in). Or, you can easily remove Plasti Dip by letting it soak in Goo-Gone and scrub it off.
Thread Starter
AudiWorld Member
Joined: Nov 2012
Posts: 199
Likes: 0
From: Bay Area
Thanks all. I have seen the Plasti Dip. Still not 100% sold on it. But I am considering it.
Bleh - how long has your plasti dip been on there and is it holding up good? Does it hold of up washing, waxing and everyday use?
Bleh - how long has your plasti dip been on there and is it holding up good? Does it hold of up washing, waxing and everyday use?
Audiworld Junior Member
Joined: Dec 2012
Posts: 34
Likes: 0
From: N Houston
+1 for PlastiDip. I sprayed the door handles on my MegaCab gunmetal grey to match the body color (OEM handles are black). 4 months later they still look great. Considering how much "use" door handles receive I am a confident badges will hold up nicely.
Trending Topics
Audiworld Junior Member
Joined: Dec 2012
Posts: 95
Likes: 0
From: Big Sky, Montana
PlastiDip is great stuff; it comes in a lot of colors, it is tuff, lasts a long time and if you get tired of it, or do a bad job putting it on it's not a lot of work to remove. Buy a can and give it a shot.
AudiWorld Stories
Bringing Audi to Life for Audi Fans
Top 10 Most Expensive Audis Ever Sold on Bring-A-Trailer
Brett Foote
10 Audi Features & Options We Miss the Most!
Joe Kucinski
Audi Recreates Crazy-Looking Speed Record Breaker From 1935
Verdad Gallardo
Coachbuilder Recreates the 1995 Audi TTS Concept
Verdad Gallardo
Every Audi V10 Car Ranked!
Joe Kucinski
9 Audi Designs That Aged Like Fine Wine
Verdad Gallardo
2026 Audi Q5 Buyer's Guide (Every Model Explained)
Brett Foote
Ranking Every Current Audi 'S' Model From Worst to First!
Joe Kucinski
10 Best Audis That are FINALLY LEGAL to Import to the U.S.!
Joe Kucinski
Thread Starter
AudiWorld Member
Joined: Nov 2012
Posts: 199
Likes: 0
From: Bay Area
ok, so i bought a can of plasti dip today. And the light bulb came on when I saw the spray can! lol I have used the dip can version of this stuff to add grips to pliers and other misc hand tools. I dont know why i didn't put two and two together. Either way, I am going to see how it all looks and turns out. still not 100% if I want to have a "rubber grippy" emblem and other trim pieces, but it seems like a good place to start and see how it goes. Worse cause I peel it off and try something different.
I will post some before and after pictures once i get it done. Hopefully tomorrow or this weekend before I have to go back to work.
Thanks all!
I will post some before and after pictures once i get it done. Hopefully tomorrow or this weekend before I have to go back to work.
Thanks all!
