install led headlight
#45
Hi Leon,
I used the code 0015121, but I am getting a bulb out error on my dash, any idea how to delete this error, my mechanic also tried the following 2 codes but the LED's didn't stay on all the time ....0033121 and 0035121
Also the LED's will not stay on when the headlight switch is @ "0" position, the LED's come on when I turn it to auto & parking mode...
As always any comments would be appreciated
I used the code 0015121, but I am getting a bulb out error on my dash, any idea how to delete this error, my mechanic also tried the following 2 codes but the LED's didn't stay on all the time ....0033121 and 0035121
Also the LED's will not stay on when the headlight switch is @ "0" position, the LED's come on when I turn it to auto & parking mode...
As always any comments would be appreciated
#46
Kufatec halogen to xenon high beam issues
Hi all, I have a Audi Q7 2007 4.2 and have recently bought the Kufatec cable for halogen to xenon conversion. Plug and play was fairly easy and lights working fine however I’m now at the dreaded high beam wiring part on the control module.
Please let me know where these fours or two wires goes into as I have no high beam now? It’s a halogen to a normal Xenon headlight without LED.
Thank you.
Please let me know where these fours or two wires goes into as I have no high beam now? It’s a halogen to a normal Xenon headlight without LED.
Thank you.
#47
AudiWorld Super User
Kufatec should have labeled those wires and given you a PDF install instructions.. just from looks two of em appear to be for your fuse box.. I assume the other two are for CAN bus
Thread
Thread Starter
Forum
Replies
Last Post
Chekm8
A4 (B6 Platform) Discussion
1
08-29-2006 10:27 AM
lawong
A4 (B6 Platform) Discussion
16
01-13-2004 07:30 AM
PaPaGeorgio
A4 (B5 Platform) Discussion
2
01-16-2003 06:41 PM