RickObe

This worked for me using OBDeleven, USA Q7 prod March 2016.

Additionally, if you set "Seat Symmetry Movement" to active in BOTH of the above modules, you get an additional MMI option that allows you to match the pax seat to the driver seat.

ven7782

This is the fault code what I see for module 5F. Any idea what fault this is? How can I correct this? I am thinking of contacting OBDEleven support for this.

RickObe

Something wasn't communicating with something. Happened one time. Low priority. Probably just a glitch. If it were my car, I wouldn't worry about it.

bobby26

Can someone confirm VIM. I can't because I installed the module
To active VIM while driving.
5F-information control unit 1
Adaptation
Testmode_video_speed_cutoff
Speed_limit
It's set on 0km/h
Can u change it to let's say 100km/h
And drive around and see if it works

dhc8guru

I am a little confused on automatic enabling the front parking sensors. When I approach an object when parking, the graphic with distance bars appears on the right of the MMI and if I double tap the parking sensor button on the center dash, whatever was on the MMI is hidden and replaced with the front camera view.
So does coding the "enable front parking sensors" do make it do something different? I found that some of the coding that has been listed were already present in my car from the factory.

lapi

The earlier version of the cars, I believe the ones before June 1st with older firmware versions did not automatically trigger the Parking Graphic when you approach an obstacle. The mod enables it. For eg, my car did not have the sensors trigger the graphic, but after enabling it is exactly behaves what you describes. If you r car is already doing it, "enable parking sensors" mod will not make any difference.

Now, what I really like to do is to somehow make it show the 360 view automatically.
I thought the following mod will do it, but it doesn't work(or may not be the right mod)
Combine the park assist 360 camera view with the*OPS*(Optical Parking Sensors) In the display
1. Instruments 09 - Adaptation
2. UDS*Adaptation Channel: IDE01170-Visual display for park assist*
i. Stored value OPS*display
Stored value modify with*OPS*360°*

RickObe

I did that mod too, and it didn't affect the display when the sensors come on automatically. But I think it changed the display when you have the full parking display active in the overhead view mode (no front or back cameras)

mi_sat

Does anyone know how to use OBDEleven to increase the heat in the heated steering wheel? It seems kind of weak in my vehicle.

Thanks in advance.

srbsq7

The details are on this thread - note the comments on the max temp:

http://www.vwaudiforum.co.uk/forum/s...)-Coding/page6

mi_sat

Thank you.

RickObe - What did you end up setting as the max steering wheel temperature?