OBDEleven
#351
AudiWorld Member
Seat Adjustment Error
I have used OBDeleven a few times without issues. Today I finally encountered an error.
I was trying to set the "Seat Adjustment Passenger Side" setting, so I followed these steps:
==========================
06 - "Seat adjustment passenger side"
Coding->Passenger_seat_adjustment_by_driver_seat
Old value:not active
New value:active
Click on active then click on the green check mark
36 - "Seat adjustment driver side"
Coding->Passenger_seat_adjustment_by_driver_seat
Click on active and click the green check mark
==========================
I was able to change the setting for module 06 - "Seat adjustment passenger side", however when I went into module 36 and tapped Coding, an error occurred with "Something went wrong. Try again" message.
Does anyone know how to resolve this issue? Much appreciated!
I was trying to set the "Seat Adjustment Passenger Side" setting, so I followed these steps:
==========================
06 - "Seat adjustment passenger side"
Coding->Passenger_seat_adjustment_by_driver_seat
Old value:not active
New value:active
Click on active then click on the green check mark
36 - "Seat adjustment driver side"
Coding->Passenger_seat_adjustment_by_driver_seat
Click on active and click the green check mark
==========================
I was able to change the setting for module 06 - "Seat adjustment passenger side", however when I went into module 36 and tapped Coding, an error occurred with "Something went wrong. Try again" message.
Does anyone know how to resolve this issue? Much appreciated!
#352
AudiWorld Member
I have used OBDeleven a few times without issues. Today I finally encountered an error.
I was trying to set the "Seat Adjustment Passenger Side" setting, so I followed these steps:
==========================
06 - "Seat adjustment passenger side"
Coding->Passenger_seat_adjustment_by_driver_seat
Old value:not active
New value:active
Click on active then click on the green check mark
36 - "Seat adjustment driver side"
Coding->Passenger_seat_adjustment_by_driver_seat
Click on active and click the green check mark
==========================
I was able to change the setting for module 06 - "Seat adjustment passenger side", however when I went into module 36 and tapped Coding, an error occurred with "Something went wrong. Try again" message.
Does anyone know how to resolve this issue? Much appreciated!
I was trying to set the "Seat Adjustment Passenger Side" setting, so I followed these steps:
==========================
06 - "Seat adjustment passenger side"
Coding->Passenger_seat_adjustment_by_driver_seat
Old value:not active
New value:active
Click on active then click on the green check mark
36 - "Seat adjustment driver side"
Coding->Passenger_seat_adjustment_by_driver_seat
Click on active and click the green check mark
==========================
I was able to change the setting for module 06 - "Seat adjustment passenger side", however when I went into module 36 and tapped Coding, an error occurred with "Something went wrong. Try again" message.
Does anyone know how to resolve this issue? Much appreciated!
Something went wrong, try again. | OBDeleven
I only cleared the cache, and then I was able to get into Coding section in module 36 and finish my mod.
Hope this helps someone who encounters the similar "Something went wrong" error.
#353
GUYS..
in 5f, there's option, does anyone know what that is for? I wonder if we turn it on, this will enable us to "mirror" our phone to the lcd?
Mirror_link:
function_off_hmi_off
in 5f, there's option, does anyone know what that is for? I wonder if we turn it on, this will enable us to "mirror" our phone to the lcd?
Mirror_link:
function_off_hmi_off
#354
AudiWorld Member
Originally Posted by chimcu
GUYS..
in 5f, there's option, does anyone know what that is for? I wonder if we turn it on, this will enable us to "mirror" our phone to the lcd?
Mirror_link:
function_off_hmi_off
in 5f, there's option, does anyone know what that is for? I wonder if we turn it on, this will enable us to "mirror" our phone to the lcd?
Mirror_link:
function_off_hmi_off
#355
AudiWorld Member
Join Date: Aug 2016
Location: Milton, Ontario, Canada
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
As far as I'm aware Mirror Link is only compatible on some Android based phones.
This is some of the apps that are Mirror Link compatible -> MirrorLink
Finally the head unit (In this case the MMI) has to be Mirror Link capable too.
#356
Hey s Fanous,
I have a friend that works for Audi in the USA.. MECHANIC.. what do you need an extract off to compare? Or if someone can provide an extract of the new A4 with working external sim, he can compare that to the Q7 and see what's up..
I have a friend that works for Audi in the USA.. MECHANIC.. what do you need an extract off to compare? Or if someone can provide an extract of the new A4 with working external sim, he can compare that to the Q7 and see what's up..
#357
OBDEleven problems
Hi all i have a big problem with my 2016 Q7, i received the OBDEleven module a while ago and a few days ago i installed the needle sweep and lap timer now here is the problem when i removed the module from the Q7 i had a fault show up on the dash with the yellow light symbol it works out i have no main beam for head lights not knowing what to do i decided to attach OBD module again and no joy fixing fault but now not only have I no main beam the aircon and heated seats are not working,starting to get very worried now and don't want to fit module again in case the whole car shuts down.
#359
AudiWorld Member
I am assuming he means a MY16 4M not a 4L.
Andy
Did you take notes or screenshots of the changes you made. Failing that, do you have the link to the instructions you followed and how sure are you that you followed them correctly?
When you go into the OBD app, I think it's per module, you can see the history of the changes made. Can you post the output as it might show what went wrong?
Andy
Did you take notes or screenshots of the changes you made. Failing that, do you have the link to the instructions you followed and how sure are you that you followed them correctly?
When you go into the OBD app, I think it's per module, you can see the history of the changes made. Can you post the output as it might show what went wrong?