When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Quickly How can I add a toggle button to on/off audi assist .
Hopefully @Gilbertorodz will be able to find some solution to B9
But my question is if anyone has access to the electronic board of the steering rack without line assist toggle ?
I'm wondering If it is possible to add only a lever with a button, instead of codin full rack which also includes CP removal .
The original board will have to be equipped with small white socked for the button corrector .
I attached a picture with a board from a car that already has a line assist activation button .
I would like to see an electronic board from a car without line assist , does anyone have it ?
Thanks
line assist connector on stering
Trying to code the lane assist but keep getting this error when trying to do the first code
Originally Posted by M_jelle
Hey
i'm new with the odbeleven but when i am in section a5 and done the coding i press the green button, then i get a fault code on my phone screen that starts with 22 that say it cant be done.
my security code is on 20103. Anyone knows what i do wrong ?
Hey
i'm new with the odbeleven but when i am in section a5 and done the coding i press the green button, then i get a fault code on my phone screen that starts with 22 that say it cant be done.
my security code is on 20103. Anyone knows what i do wrong ?
Hi thanks for the reply.
OBD eleven cannot connect to the car on ignition only it will oy connect with engine on.
This is the first Audi I have had that it won't connect with ignition.
Hi thanks for the reply.
OBD eleven cannot connect to the car on ignition only it will oy connect with engine on.
This is the first Audi I have had that it won't connect with ignition.
I asked , as I'm prete sure that this problem is caused by running engine . ignition on only
you need to figure out why you can not connect obd eleven with ignition only
I asked , as I'm prete sure that this problem is caused by running engine . ignition on only
you need to figure out why you can not connect obd eleven with ignition only
I think tomorrow I'll reset the app and the Bluetooth and then restart and reconnect and see if that helps.
It just keeps saying connecting then an error occurred when engine off and ignition only. Then as soon as I start the car it connects.
I'll report back if I can sort this out, thanks again.
I asked , as I'm prete sure that this problem is caused by running engine . ignition on only
you need to figure out why you can not connect obd eleven with ignition only
So after much mucking about I managed to get it to connect when ignition on and engine off.
Got the active lane assist working and tested. It works perfectly.
Just coded the road sign recognition as well.
01-09-2023, 08:20 AM
