New stroker motor for 1.8t
#1
New stroker motor for 1.8t
<center><img src="http://pictureposter.audiworld.com/23829/picture_015.jpg"></center><p>I had a stock short block in the car for the 1.8t challange. New motor is-AEB block, ABA crank, carrillo rods, JE pistons using my ported head/manifold and GT30 off the other motor.
I also pulled the syncro drivetrain and am adding the 02M 6 speed with the haldex coupling. Still working on a way to fully control the haldex ECU. Any input would be helpful.
I also pulled the syncro drivetrain and am adding the 02M 6 speed with the haldex coupling. Still working on a way to fully control the haldex ECU. Any input would be helpful.
#3
Post in the TT forum. I know there is a haldex controler on the market......
Not sure how advanced it is.
I also know that citron uses a version of haldex in their race cars that is able to be programed via laptop....thats is prolly $$$$$.
I also know that citron uses a version of haldex in their race cars that is able to be programed via laptop....thats is prolly $$$$$.
#5
This should give you guys a better Idea what I'm doing.
<center><img src="http://pictureposter.audiworld.com/23829/p2070158.jpg"></center><p><ul><li><a href="http://fastenough.com">http://fastenough.com</a</li></ul>
Trending Topics
#9
rear diff is mounted
<center><img src="http://pictureposter.audiworld.com/23829/picture.jpg"></center><p>Just have to put on a-arms /axels and rear mount. To bad the next 1.8t challange is in CA.