Rear vented brake upgrade help!!
#1
AudiWorld Member
Thread Starter
Join Date: Jul 2003
Location: Texas
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Rear vented brake upgrade help!!
OK, so I installed my new vented "S6" brakes into my UrQ last night. I ran into trouble when I got to the e-brake cables. I am using the newer 4k units. Turns out they seem a bit short. I installed the new braket on the end of the e-brake lever rod (the one that extends out of the rubber boot). Either the cables or the rod are to short. The two halves come up a good 6in short. Am I missing something here? Thanks
Eric Harten
Eric Harten
#3
AudiWorld Member
Thread Starter
Join Date: Jul 2003
Location: Texas
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
It's an early 83
It's an early 83. I found some 6mm threaded rod and a coupler today. I think I am just going to extend the rod 6in and be done with it.
Thread
Thread Starter
Forum
Replies
Last Post
stevenmurray
Quattro: Turbo / Ur / Sport
4
10-17-2006 03:14 PM
pureroundcircle
Audi 5000 / 200 / V8 Discussion
1
06-14-2005 01:03 PM
JDBlueAudiS4
S4 (B6 & B7 Platforms) Discussion
10
07-07-2004 07:30 AM