Feeler Post- Free to a good home.
#1
Feeler Post- Free to a good home.
Just seeing if there is any interest- This is a somewhat obscure posting, but I figure what the heck. It's free, right?
1 PAIR (that's right, just 2) of DTM Kreuz 5 wheels. Free. You have to come and pickem up.
<IMG SRC="http://pictureposter.audiworld.com/19210/07-05-03p.jpg?"> On my car
<IMG SRC="http://pictureposter.audiworld.com/19210/52.jpg">
DTM's site pic
One front wheel, one rear wheel. Dimensions are:
18x8 f; ET35 5x112
18x8 r; ET27 5x112
These have a staggered appearance to them, i.e. the rear wheel has a bigger lip than the front.
Now... The front wheel has a pretty severe bend to it. For $200, Stan @ DTM will rehoop the wheel with a new barrel to make it just like new (or Woody's can prolly repair the existing rim, but not sure how much more or less that would be in comparo). For another $1250.00 ($614/wheel retail) or so, the other pair can be made to match. Some places are much, much less BTW- For instance I know that 5280 Wheel Co. place used to sell them for 20% less, so shopping around is key. The bend, by the way, is courtesy of CDOT road construction (you guys RAWK).
Front wheels clear big brakes (no problems clearing my Porsche 996 calipers), though some applications like StopTech may be questionable without a spacer. If you have upgraded the rear brakes to, say a ST 4 wheel kit, the rears will not fit due to the pad height, and ET that these wheels have.
For those who don't know, I used to sell DTM Kreuz along with HRE, Kinesis, Volk, etc. These wheels were my demo wheels, and I ran them on the pass side of the car along with a set of DTM Kreuz 7's on the driver's side of the car to display different styles (hence why there are only 2 wheels available).
Again, this is a FEELER post only. I am looking for interest, as I understand this is an odd post. Also... I have to present the wife with the idea, who might not be so thrilled about the situation (but should since it's clearing out some room in the garage).
Interested parties may mail me: rshibata@gmail.com.
Thanks,
R
1 PAIR (that's right, just 2) of DTM Kreuz 5 wheels. Free. You have to come and pickem up.
<IMG SRC="http://pictureposter.audiworld.com/19210/07-05-03p.jpg?"> On my car
<IMG SRC="http://pictureposter.audiworld.com/19210/52.jpg">
DTM's site pic
One front wheel, one rear wheel. Dimensions are:
18x8 f; ET35 5x112
18x8 r; ET27 5x112
These have a staggered appearance to them, i.e. the rear wheel has a bigger lip than the front.
Now... The front wheel has a pretty severe bend to it. For $200, Stan @ DTM will rehoop the wheel with a new barrel to make it just like new (or Woody's can prolly repair the existing rim, but not sure how much more or less that would be in comparo). For another $1250.00 ($614/wheel retail) or so, the other pair can be made to match. Some places are much, much less BTW- For instance I know that 5280 Wheel Co. place used to sell them for 20% less, so shopping around is key. The bend, by the way, is courtesy of CDOT road construction (you guys RAWK).
Front wheels clear big brakes (no problems clearing my Porsche 996 calipers), though some applications like StopTech may be questionable without a spacer. If you have upgraded the rear brakes to, say a ST 4 wheel kit, the rears will not fit due to the pad height, and ET that these wheels have.
For those who don't know, I used to sell DTM Kreuz along with HRE, Kinesis, Volk, etc. These wheels were my demo wheels, and I ran them on the pass side of the car along with a set of DTM Kreuz 7's on the driver's side of the car to display different styles (hence why there are only 2 wheels available).
Again, this is a FEELER post only. I am looking for interest, as I understand this is an odd post. Also... I have to present the wife with the idea, who might not be so thrilled about the situation (but should since it's clearing out some room in the garage).
Interested parties may mail me: rshibata@gmail.com.
Thanks,
R
Thread
Thread Starter
Forum
Replies
Last Post