GIAC Chip Info and Dyno
#1
GIAC Chip Info and Dyno
<center><img src="http://pictureposter.audiworld.com/15175/rs6_dyno.jpg"></center><p>Hello All,
GIAC has released their RS6 software today.
The engine software is $2000
and the Tip software is $595.
Please note that the tiptronic software is not optional. Because of the large torque increase the oem Tiptronic software will go into limp mode.
The dyno was run on 91 octane fuel.
Please feel free to call or email with any questions.
Jeff
GIAC has released their RS6 software today.
The engine software is $2000
and the Tip software is $595.
Please note that the tiptronic software is not optional. Because of the large torque increase the oem Tiptronic software will go into limp mode.
The dyno was run on 91 octane fuel.
Please feel free to call or email with any questions.
Jeff
#4
Wow that came out all wrong...
I mean what is an approximate rating for the total gained bhp? I tried doing the math and failed miserably (even though I'm usually good at those things).
#5
I do not usually like to convert wheel power to crank. Here is a good conversion based off of
manufacturer base power.
506 horsepower
518 Torque
This is an improvement of about 56 horsepower and 108 ft/lbs of torque.
Take a look at the power band. No dips or spikes.
Jeff
506 horsepower
518 Torque
This is an improvement of about 56 horsepower and 108 ft/lbs of torque.
Take a look at the power band. No dips or spikes.
Jeff
#7
Your a troublemaker Jeff!!!!
Always sending out those messages that cause people to lose brain cells and then start a quest for more power!! You should be ashamed of yourself-instigator!!
: ))
: ))
Trending Topics
#8
O.CT Dynapac runs for comparison.....m......
<center><img src="http://pictureposter.audiworld.com/7675/rs6_stage_1_dyno.jpg"></center><p>For those that want to have something to comapre the GIAC to, here ya go.
O.CT Software
Milltek C/B Exhaust
Hyperboost Valves (2)
This is our Stage 2 package, this was the setup that made the big numbers. For more info, call or email me directly.
Brian Rosenberg
Speedsport Technik
203-229-0590
www.speedsporttechnik.net
brian@speedsporttechnik.net
O.CT Software
Milltek C/B Exhaust
Hyperboost Valves (2)
This is our Stage 2 package, this was the setup that made the big numbers. For more info, call or email me directly.
Brian Rosenberg
Speedsport Technik
203-229-0590
www.speedsporttechnik.net
brian@speedsporttechnik.net