Anyone found a license plate frame with close match to non-titanium trim?
#4
yup. I'm using the black version up front. The front was a little trickier...
I'm pretty sure I only used the top screws on the front and have machine screws and nuts securing the frame to the plate on the bottom.
I may have also used some stainless washers as a spacer (don't really remember).
<img src="http://brianja.smugmug.com/photos/414292672_Hw7pE-L-1.jpg">
I may have also used some stainless washers as a spacer (don't really remember).
<img src="http://brianja.smugmug.com/photos/414292672_Hw7pE-L-1.jpg">