ELEVENS....Question on the Lidatek install
#15
AudiWorld Super User
Here
<center><img src="http://pictureposter.audiworld.com/109574/dsc_0005_small.jpg"></center><p>
Didn't need to remove the bumper but required cutting two small pieces out of the grill:
<img src="http://pictureposter.audiworld.com/109574/dsc_0002_small.1.jpg">
Didn't need to remove the bumper but required cutting two small pieces out of the grill:
<img src="http://pictureposter.audiworld.com/109574/dsc_0002_small.1.jpg">
#18
AudiWorld Senior Member
Thread Starter
Join Date: Oct 2005
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
I think it is too low......cops are trained to aim center of mass first
THen focus on license plate, then headlight....check out the video clips below, and see how hard it is to hit the plate at 1000 feet. I don;t remember, but I think the width of the beam is 6 feet at 1000 yards.....
It is very hard to focus on just the plate.....
I am asking a bunch of folks what they think about location...<ul><li><a href="http://www.cyberblob.net/video/yvr_ljtest/">http://www.cyberblob.net/video/yvr_ljtest/</a</li></ul>
It is very hard to focus on just the plate.....
I am asking a bunch of folks what they think about location...<ul><li><a href="http://www.cyberblob.net/video/yvr_ljtest/">http://www.cyberblob.net/video/yvr_ljtest/</a</li></ul>
#19
AudiWorld Senior Member
Thread Starter
Join Date: Oct 2005
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
From an LPP expert.........
".................heads sit behind the
mesh. Ideally they should be at least flush with the mesh. I would
prefer to bring them to the inner side, but the location indicated in
your picture should be just fine. LPP provides a very wide beam of
divergence, so you shouldn't worry too much mounting it low."
A response from someone who tests lots of different jammers......We will see, I still would like to place them above the plate filler.....depends on how hard it will be for me to take off the bumper.........
mesh. Ideally they should be at least flush with the mesh. I would
prefer to bring them to the inner side, but the location indicated in
your picture should be just fine. LPP provides a very wide beam of
divergence, so you shouldn't worry too much mounting it low."
A response from someone who tests lots of different jammers......We will see, I still would like to place them above the plate filler.....depends on how hard it will be for me to take off the bumper.........
#20
AudiWorld Senior Member
Thread Starter
Join Date: Oct 2005
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
Video of LPP in action
THere is a load more on youtube.......this unit consistently gives JTG....<ul><li><a href="http://www.youtube.com/watch?v=P1rE3e17wd0&search=Laser%20Jammer%20LP P">http://www.youtube.com/watch?v=P1rE3e17wd0&search=Laser%20Jammer%20LP P</a</li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
Turbo_Whip!
A4 (B6 Platform) Discussion
2
06-22-2005 08:18 AM
nverfollow
TT (Mk1) Discussion
0
05-09-2004 01:33 PM
Er-excess-4
S4 / RS4 (B5 Platform) Discussion
4
05-07-2003 08:04 AM
back2black
S4 / RS4 (B5 Platform) Discussion
1
04-21-2003 10:16 PM