Der Kimbo

Considering having 19" & 20" with a very similar spoke style made in Audi fitment. They would be forged, under 20lbs and in a vareity of finishes. The price point would be just under that of an HRE with higher quality. Would this style be fitting of the RS4 (and other models)?

<img src="http://pictureposter.audiworld.com/24630/editionrace.jpg">

RXBG

not fitting at all. but who cares? if you like it express yourself. get it.

Initial DTM

Go for it and sponsor me =D

ruknd

they look kenisisesque. I like them

Bob W.

the spokes look delicate. compare that wheel to a similar wheel built by Kinesis, which is of course one of the strongest wheels you can buy...much beefier spokes:

<img src="http://www.wheelenhancement.com/Images/44d3790d1df35_K29R_obw.jpg">

as far as the style, get what you like.

Der Kimbo

Thought is to do Porsche Fitment first, and then Lamborghini/Audi fitmentin the second run. They will be manufactured by Champion.

Bob W.

personally, I don't like those, but it's difficult to tell w/o seeing them on the car. I think I'd buy one set, show them on the car, and see what kind of reaction you get before ordering 80 of them.

ruknd

champion 2 piece...I likey but I agree then spokes need to be beefier

Der Kimbo

It's the only mesh style wheel I've seen that is a rounded Y spoke instead of a straight V. That single characteristic is what really sets the design IMO. If I could do one set I would, but it would still cost the same amount of $$$. Don't have any pics of them on an Audi but here are a few on other cars...

<img src="http://www.turbopower.ws/photos/albums/userpics/10010/2006-Hamann-Lamborghini-Gallardo-Left-Front-1280x960.jpg">

<img src="http://www.turbopower.ws/photos/albums/1007/2006_Hamann_BMW_M6/2006%20Hamann%20BMW%20M6_4.jpg">

<img src="http://www.turbopower.ws/photos/albums/userpics/10010/2006-Hamann-Ferrari-F430-Spider-Front-Left-1024x768.jpg">

Sin4lly

I like your style...I voluteer if you're in ever in need of a driver/butler :-)