Pete @ Stratmosphere

<center><img src="http://www.stratmosphere.com/s4_b6_cutout_320.jpg"></center><p>
Testing at SpeedSport Technik has been completed for the new Milltek catback. Average of about 15 wheel horsepower (about 20hp at the crank to compare with Audi numbers). Torque at about 5 lb/ft at the wheels and around 7-8 at the crank.

I've been driving this setup for about 300 miles, and the dyno confirms what I feel. It does sound and look better, but it also has MORE power. -Pete, Strat<ul><li><a href="http://www.stratmosphere.com/milltek_s4_exhaust.htm">B6 S4 Milltek Dual Catback Exhaust</a></li></ul>

HarnessedLunacy

any loss of low end power?

Spoonie G

Any sound clips?

Pete @ Stratmosphere

so it's all good. It's great to verify the result on a car here in the USA. -Pete

Pete @ Stratmosphere

We have the equipment now (portable studio, shotgun mike, boom). Give us 7-10 days

Spoonie G

Thanks Buddy, Keep us posted

vman4066

I'm lookign to assemble a small portable rig

what shotgun will you use?
what is your "portable studio"
eg what pre-amp, recording device

Pete @ Stratmosphere

My brother writes and produces music for a living. BOSS BR-532 "portable studio" with SmartMedia, Azden SGM-1X shotgun mic, Audio Technica shotgun windscreen, Gitzo weekend fishpole boom. Sources: BH Photo and Sweetwater. There! -Pete

CoOlSlY

Not been dynoed before the exaust installation?

Pete @ Stratmosphere

It was. 250whp before. 265whp after.