I've asked this before, does anyone know how to.....
#1
AudiWorld Super User
Thread Starter
Join Date: Mar 2002
Posts: 12,452
Likes: 0
Received 0 Likes
on
0 Posts
I've asked this before, does anyone know how to.....
disconnect the steady burn on the front indicators, so it just flashes the turn signal?? I did this in my B5, one wire going into the bottom of the turn signal tab was for steady burn, the other for the blinker..
Is it like this for the B6 too?? If anyone can help me, it is much appreciated!!
Thanks guys,
Nick
Is it like this for the B6 too?? If anyone can help me, it is much appreciated!!
Thanks guys,
Nick
#6
Still have ETKA, not sure why... ;-)...
but here's the cutsheet.
Right-click and save. Hope that helps, if not, let me know, and I'll see if I can dig up anything else.
<a href="http://b6s4.com/host/headlightcutsheet.jpg">Right-click and save</A>
Right-click and save. Hope that helps, if not, let me know, and I'll see if I can dig up anything else.
<a href="http://b6s4.com/host/headlightcutsheet.jpg">Right-click and save</A>
#7
AudiWorld Super User
Thread Starter
Join Date: Mar 2002
Posts: 12,452
Likes: 0
Received 0 Likes
on
0 Posts
Helps a little, but...
I still need to find what wire is what... I think if I remember correctly, it was the wire with the black stripe on it, but I can't remember totally..
Any other info you have Wes, will help out immensly!!
Thanks,
Nick
Any other info you have Wes, will help out immensly!!
Thanks,
Nick
Trending Topics
#8
I just took another look through the cut sheets, and that's all I have for the xenon system.
I have some more images for the halogen system, but they aren't going to help.
As far as which wire is which, I don't know. Sorry. :-(
As far as which wire is which, I don't know. Sorry. :-(
Thread
Thread Starter
Forum
Replies
Last Post
Sloooo4esT
Audi Original "S" Cars
0
07-23-2006 09:54 AM
A3 4 Me
Audio, Video and Security Discussion
2
06-28-2003 12:37 PM