Brembo BBK...
#1
AudiWorld Senior Member
Thread Starter
Brembo BBK...
So I decided to do a BBK and hopefully a LW rear rotor shortly... After talking to some folks I went with the Brembo 380MM kit, black calipers and slotted rotors... Planned on Stoptech but after learning more Brembo won out...
Plan on doing a few track days this year and wanted the weight loss for drag racing... Putting them on Thur. so I will have pics and impressions... Just thought I would share some pics with them off the car and weights...
Brembo 380MM BBK
Rotor - 20.2 lbs
Caliper(with pads) - 11.0 lbs
carrier, line, etc. - 1.8 lbs
Total Weight - 33.0 lbs
Neal(NWS4Guy) weighed his Stoptech 355mm kit and the weights are below... I'll see what I get for the stockers? Neal got 41 lbs total... So I am at 8 lbs saving vs 10 lbs... Questions let me know and like I said I'll post much more onced installed...
Stoptech BBK ST-60:
Rotor - 18.10 lbs
Caliper - 8.9 lbs
Pads - 2.6 lbs
Caliper Carrier - 1.5 lbs
Total weight - 31.10 lbs
Plan on doing a few track days this year and wanted the weight loss for drag racing... Putting them on Thur. so I will have pics and impressions... Just thought I would share some pics with them off the car and weights...
Brembo 380MM BBK
Rotor - 20.2 lbs
Caliper(with pads) - 11.0 lbs
carrier, line, etc. - 1.8 lbs
Total Weight - 33.0 lbs
Neal(NWS4Guy) weighed his Stoptech 355mm kit and the weights are below... I'll see what I get for the stockers? Neal got 41 lbs total... So I am at 8 lbs saving vs 10 lbs... Questions let me know and like I said I'll post much more onced installed...
Stoptech BBK ST-60:
Rotor - 18.10 lbs
Caliper - 8.9 lbs
Pads - 2.6 lbs
Caliper Carrier - 1.5 lbs
Total weight - 31.10 lbs
#3
AudiWorld Senior Member
Thread Starter
Red, thanks man! looking forward to getting them and the Alu Kruez on... had the brace since the group buy just never put it on... lol also, will test the new tune this Sat. and see if I can improve on my 11.79! later Ron
#5
AudiWorld Member
Join Date: Aug 2010
Location: Redmond, WA
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Also any chance you could take a pic of the inside of the caliper (pistons) and the top of the caliper? I've never looked at one up close and am curious.
Thanks!
Thanks!
#7
AudiWorld Senior Member
Thread Starter
BBS CHR's 19x8.5's... Gonna look choice and perform even better!
Trending Topics
#8
AudiWorld Senior Member
Thread Starter
#9
AudiWorld Senior Member
Thread Starter