18014 ABS Malfunction
01-05-2006, 09:27 AM
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
18014 ABS Malfunction
I am getting this code:
18014 - Rough Road/Engine Torque Signal from ABS: Electrical Malfunction
I cleared it and it came right back. My ABS light is not coming on and I did have the controller changed about 5 months ago. any ideas what's wrong?
18014 - Rough Road/Engine Torque Signal from ABS: Electrical Malfunction
I cleared it and it came right back. My ABS light is not coming on and I did have the controller changed about 5 months ago. any ideas what's wrong?
01-05-2006, 09:37 AM
#3
Junior Member
Thread Starter
Join Date: Jul 2005
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
rebuilt unit. It was suppose to fix the trouble part on the factory one. What I can't figure out is
why my ABS light isn't on? Whenever the unit goes bad the ABS light comes on according to my experience and reading the forum.
01-05-2006, 09:39 AM
#4
AudiWorld Senior Member
Join Date: Jul 2000
Posts: 1,062
Likes: 0
Received 0 Likes
on
0 Posts
I haven't had any personal experience with these units but you might try calling the rebuilder.
Maybe someone else can shed some experienced light on this subject.
My S4 is getting long in the tooth so I imagine I'll be looking into this stuff soon as well.
My S4 is getting long in the tooth so I imagine I'll be looking into this stuff soon as well.
Thread
Thread Starter
Forum
Replies
Last Post
Omega Supreme
A4 (B5 Platform) Discussion
2
05-18-2008 02:59 AM
algisas
Audi 100 / A6 (C4 Platform)
0
11-21-2005 07:45 AM
18014, 2000, a4, abs, abscode, audi, code, electrical, engine, malfunction, road, roadengine, rough, signal, torque
