Additional MTM Spacer/Avus pix (if you care)
#1
Additional MTM Spacer/Avus pix (if you care)
I'm not sure what angle that will show off the spacers the best, but here's a few more pix:
From the side:
<img src="http://pictureposter.audiworld.com/9742/spacers_sideview.jpg">
Front wheel, from above the fender:
<img src="http://pictureposter.audiworld.com/9742/spacers_front_top.jpg">
rear wheel, from above the fender:
<img src="http://pictureposter.audiworld.com/9742/spacers_rear_top.jpg">
To recap, these are MTM 15mm spacers behind Avus rims, on an S4 running H&R Sport Springs w/ Neuspeed/Bilsteins
I leave you with a [totally unnecessary] pic of my newly installed brushed aluminum Rob **** II (thanx, Zev!)
<img src="http://pictureposter.audiworld.com/9742/rkii_in_car.jpg">
From the side:
<img src="http://pictureposter.audiworld.com/9742/spacers_sideview.jpg">
Front wheel, from above the fender:
<img src="http://pictureposter.audiworld.com/9742/spacers_front_top.jpg">
rear wheel, from above the fender:
<img src="http://pictureposter.audiworld.com/9742/spacers_rear_top.jpg">
To recap, these are MTM 15mm spacers behind Avus rims, on an S4 running H&R Sport Springs w/ Neuspeed/Bilsteins
I leave you with a [totally unnecessary] pic of my newly installed brushed aluminum Rob **** II (thanx, Zev!)
<img src="http://pictureposter.audiworld.com/9742/rkii_in_car.jpg">
#4
Nope...in fact, I'm tempted to lower it a bit more
I've got the grooved Bilsteins, on the 'highest' setting...I *may* be able to lower it one notch without rubbing, but I'm not sure...
Thread
Thread Starter
Forum
Replies
Last Post
S40RCE:Smurf
NY / NJ / CT Discussion
3
08-09-2006 09:37 AM
DM-S4
S4 / RS4 (B5 Platform) Discussion
14
09-21-2003 06:33 AM
inviS4ble
S4 / RS4 (B5 Platform) Discussion
26
06-15-2002 04:12 AM
inviS4ble
S4 / RS4 (B5 Platform) Discussion
14
02-22-2002 07:52 PM