Dyno Results
09-25-2006, 06:05 PM
#1
New Member
Thread Starter
Join Date: Aug 2005
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Results
Only mod was a chip, My car is an 01.5 Tiptronic. All runs were done in 3rd gear, manual mode. Transmission is recoded to 00032. Dyno is a Land And Sea AWD DYNOmite Dynometer. Anyone know whats up with the lean/rich conditions at the higher RPM range on both the stock and chipped runs?
STOCK
<img src="http://www.audizine.com/gallery/data/500/7506Stock-med.jpg">
APR 93 Chip
<img src="http://www.audizine.com/gallery/data/500/7506APR93-med.jpg">
Both
<img src="http://www.audizine.com/gallery/data/500/7506Both-med.jpg">
STOCK
<img src="http://www.audizine.com/gallery/data/500/7506Stock-med.jpg">
APR 93 Chip
<img src="http://www.audizine.com/gallery/data/500/7506APR93-med.jpg">
Both
<img src="http://www.audizine.com/gallery/data/500/7506Both-med.jpg">
09-25-2006, 06:22 PM
#2
Member
Join Date: Feb 2002
Posts: 2,908
Likes: 0
Received 0 Likes
on
0 Posts
Stock (less boost) runs leaner. Chipped, looked good until the high rpm where it looks like the ECU
"dumped fuel" possibly from a high EGT condition. Was each pull relatively long? >20 seconds? Poor airflow through the ICs?
Was Jimmy Walker the dyno operator? DYNOmite!!!
Was Jimmy Walker the dyno operator? DYNOmite!!!
Thread
Thread Starter
Forum
Replies
Last Post
VR_Life
NorCal Discussion
10
08-27-2006 03:53 PM
KSpider
TT (Mk1) Discussion
0
05-16-2006 09:01 AM
0cean
Audi A3 / S3 / RS 3
21
12-03-2005 07:42 AM