S4 / RS4 (B5 Platform) Discussion Discussion forum for the B5 Audi S4 & RS4 produced from 1998-2002

E46 M3 Turbo 11psi 603rwhp (Stock Motor, Stock Exhaust)

Thread Tools
 
Search this Thread
 
Old 11-14-2006, 12:25 PM
  #1  
AudiWorld Senior Member
Thread Starter
 
DynoQueen's Avatar
 
Join Date: Sep 2004
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default E46 M3 Turbo 11psi 603rwhp (Stock Motor, Stock Exhaust)

Finally someone has put on a decent turbo on the M3. Made the following numbers on stock exhaust, stock motor.

475rwhp at 5psi
495rwhp at 6psi
515rwhp at 7psi
550rwhp at 8.5psi
575rwhp at 10psi
603rwhp at 11psi

They are still pushing it and supposedly stopping at near death of them motor to see what its capable of. Remember this is a stock motor, not even a HG.

<img src="http://www.horsepowerfreaks.com/videos/m3turbokit/HPFM3_603rwhp.jpg">


Audi Content:

I like S4's and Simmply's car is sick.
Old 11-14-2006, 12:30 PM
  #2  
Former Vendor
 
SIMPPLY @ WMS's Avatar
 
Join Date: Apr 2004
Posts: 5,958
Likes: 0
Received 0 Likes on 0 Posts
Default

congrats my man ... can't wait to run your *** : )))
Old 11-14-2006, 12:34 PM
  #3  
AudiWorld Senior Member
Thread Starter
 
DynoQueen's Avatar
 
Join Date: Sep 2004
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default Not my car bro! This is some company in Oregon doing it. My car is getting fully built at AA.

Im going for 30+psi on a built motor, on high boost mode (c16).
Old 11-14-2006, 12:41 PM
  #4  
AudiWorld Senior Member
Thread Starter
 
DynoQueen's Avatar
 
Join Date: Sep 2004
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default

That run was done on C16, dont know about the timing.I know the S54 is very strong and its lovin FI
Old 11-14-2006, 12:42 PM
  #5  
AudiWorld Senior Member
Thread Starter
 
DynoQueen's Avatar
 
Join Date: Sep 2004
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default No Methanol, No spraying anything. Just C16 gas.

Ive ran my car with 10psi but Supercharged with a 100 shot of nitrous for months (hard driving) with no issues.
Old 11-14-2006, 12:42 PM
  #6  
AudiWorld Super User
 
Nigel (no more S4)'s Avatar
 
Join Date: Jul 2004
Posts: 4,837
Likes: 0
Received 0 Likes on 0 Posts
Default

probably $1k per PSI!!!
Old 11-14-2006, 12:43 PM
  #7  
AudiWorld Senior Member
Thread Starter
 
DynoQueen's Avatar
 
Join Date: Sep 2004
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default No water, therefore no running out of anything. So far its running great with no detonation..

They are cranking up the boost to see where it goes.
Old 11-14-2006, 12:45 PM
  #8  
AudiWorld Senior Member
Thread Starter
 
DynoQueen's Avatar
 
Join Date: Sep 2004
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default

Rumor has it this turbo kit will run about 9k.
Old 11-14-2006, 12:46 PM
  #9  
AudiWorld Senior Member
Thread Starter
 
DynoQueen's Avatar
 
Join Date: Sep 2004
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default My car is a completely different story. Completely custom with stand-alone, giant turbo,built engine

and everything else needed (fuel pumps, ignition system, etc..)

Were talking 1000HP+, cost is a hefty amount.
Old 11-14-2006, 12:47 PM
  #10  
AudiWorld Senior Member
Thread Starter
 
DynoQueen's Avatar
 
Join Date: Sep 2004
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default

Recall, rod bearings had manufacturer defects, that issue has been long gone since 02.


Quick Reply: E46 M3 Turbo 11psi 603rwhp (Stock Motor, Stock Exhaust)



All times are GMT -8. The time now is 07:28 AM.