I told you I would keep everyone up to par on the status of this..........
06-11-2002, 05:09 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2002
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
I told you I would keep everyone up to par on the status of this..........
Well good news for me, I got a new (to me) clutch from Galati's race car! I also got my Downpipes in and my K04's installed. He also has ready to go (but no pictures 
an aluminum flywheel, RS4 IC's, Software, Fuel upgrade)
Well I told you I would be up to date on the car. I hope you enjoy the pictures!
<img src="http://pictureposter.audiworld.com/32048/ko4side.jpg">
Here are the K04's attached to the motor
<img src="http://pictureposter.audiworld.com/32048/ko4rear.jpg">
This is a shot of the rear of the motor with the K04's intalled
<img src="http://pictureposter.audiworld.com/32048/clutchsmallpic.jpg">
This is the clutch! He He
<img src="http://pictureposter.audiworld.com/32048/myclutchsmall.jpg">
and another
<img src="http://pictureposter.audiworld.com/32048/galatiandmydpssmall.jpg">
Mike Galati (green) and my down pipes) also that is not me in the pics just a fellow S4 owner!
I hope that you all enjoy and like I said before I will keep everyone updated on the cost
and progress of the car!
-Clinton
an aluminum flywheel, RS4 IC's, Software, Fuel upgrade)Well I told you I would be up to date on the car. I hope you enjoy the pictures!
<img src="http://pictureposter.audiworld.com/32048/ko4side.jpg">
Here are the K04's attached to the motor
<img src="http://pictureposter.audiworld.com/32048/ko4rear.jpg">
This is a shot of the rear of the motor with the K04's intalled
<img src="http://pictureposter.audiworld.com/32048/clutchsmallpic.jpg">
This is the clutch! He He
<img src="http://pictureposter.audiworld.com/32048/myclutchsmall.jpg">
and another
<img src="http://pictureposter.audiworld.com/32048/galatiandmydpssmall.jpg">
Mike Galati (green) and my down pipes) also that is not me in the pics just a fellow S4 owner!
I hope that you all enjoy and like I said before I will keep everyone updated on the cost
and progress of the car!
-Clinton
06-11-2002, 05:28 PM
#6
Junior Member
Thread Starter
Join Date: Feb 2002
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Well, I am doing......
<center><img src="http://pictureposter.audiworld.com/32048/mvc-007x.1.jpg"></center><p>all performed at Galati Racing Technologies
K04 Upgrade with full rs4 inlet piping
RS4 Intercooler Upgrade with the RS4 duct work
K04 software and fuel system
Forge DV's
Samco Hose Kit (blue)
Custom Aluminum flywheel and Champion Audi Clutch
Custom Downpipes (similar to AWE)
Stebos Exhaust also having custom straight pipes made with VM2 tips (no muffler of resonator)
Stoptech big brake kit with stainless lines all around
Autospeed DTS
Tanoga SS
Neuspeed rear sway bar and Billet plate frame (for bling bling also matches the alum. mirrors)
Carbon fiber hood19 X 8.5 Sportec Mono 10's wrapped in Nitto 555's
LLTek All season floor mats
LLTek shift ****
Euro housings/Bulbs/Ballasts
Carachtre Front bumper and Grille
Fog light delete
Aluminum Mirror housings
Pioneer P73000 In dash 7" DVD player
SpeedMount Camera mount
Out of breath......whoooo
I'm sure I forgot something!
I still need a damn snub mount!
K04 Upgrade with full rs4 inlet piping
RS4 Intercooler Upgrade with the RS4 duct work
K04 software and fuel system
Forge DV's
Samco Hose Kit (blue)
Custom Aluminum flywheel and Champion Audi Clutch
Custom Downpipes (similar to AWE)
Stebos Exhaust also having custom straight pipes made with VM2 tips (no muffler of resonator)
Stoptech big brake kit with stainless lines all around
Autospeed DTS
Tanoga SS
Neuspeed rear sway bar and Billet plate frame (for bling bling also matches the alum. mirrors)
Carbon fiber hood19 X 8.5 Sportec Mono 10's wrapped in Nitto 555's
LLTek All season floor mats
LLTek shift ****
Euro housings/Bulbs/Ballasts
Carachtre Front bumper and Grille
Fog light delete
Aluminum Mirror housings
Pioneer P73000 In dash 7" DVD player
SpeedMount Camera mount
Out of breath......whoooo
I'm sure I forgot something!
I still need a damn snub mount!
Trending Topics
06-11-2002, 05:32 PM
#8
Junior Member
Thread Starter
Join Date: Feb 2002
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Expensive. thats all I know. I just dropped off another $1500 today!
He has bought 3K in parts that does not include the turbos! samcos, lots of stuff.
I will let you know what it cost when I get the final bill.
ps great sig!
I will let you know what it cost when I get the final bill.
ps great sig!