If you have a Stratmosphere SS read this!
12-03-2001, 05:18 PM
#1
Member
Thread Starter
Join Date: Jul 2001
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
If you have a Stratmosphere SS read this!
I have been experiencing problems with my SS ever since I installed this SS. The push-down motion to get into reverse does no fully go all the way down. Well, last week I took apart the shifter and found the problem. The rubber boot that houses the two shafts that goes down to the transmission is causing the problem. When press down, the shifter rubs against that rubber boot and therefore cannot go all the way down. Does anyone else experience this problem?
12-03-2001, 05:40 PM
#7
Banned
Join Date: Jul 2001
Posts: 19,472
Likes: 0
Received 0 Likes
on
0 Posts
Well, the push-down is supposed to be retained. You might want to initially inspect....
it yourself before you take it in. Take the boot off and make sure everything is in tact...spring & c-clip retainer, etc.
It's odd that you don't push down for reverse. Does first gear seem a little off to the right, or left(sorry, I think it would have an offset to the left if it's out of whack like that)? If it is, you are in need of a reinstall.
It's odd that you don't push down for reverse. Does first gear seem a little off to the right, or left(sorry, I think it would have an offset to the left if it's out of whack like that)? If it is, you are in need of a reinstall.
