Motion sensor
06-29-2002, 06:12 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Motion sensor
does anyone know a tech article on how to adjust the sensitivity of the interior motion sensor. I have access to a 1551 but have never seen any write ups. With the sunroof open now even some fuzz will set it off. TIA
06-29-2002, 08:47 AM
#2
Senior Member
Join Date: May 2001
Posts: 8,006
Likes: 0
Received 0 Likes
on
0 Posts
Do this with the VAG...
Go to the 45 - Int. Monitor Group and then select Adaptation. Change to channel 01. It should now tell you the current sensitivity level in percent. Enter a new lower value here.
I have mine set at 75. It seems to work well in reducing false alarm with the sunroof tilted or the windows cracked a bit.
I have mine set at 75. It seems to work well in reducing false alarm with the sunroof tilted or the windows cracked a bit.
Thread
Thread Starter
Forum
Replies
Last Post
newguy662
S4 / RS4 (B5 Platform) Discussion
14
09-24-2007 11:29 AM
Synmag
Audi allroad
9
06-06-2005 11:13 AM
sayemthree
S4 (B6 & B7 Platforms) Discussion
7
07-12-2004 06:04 AM
ReTodd
A4 (B6 Platform) Discussion
13
04-01-2003 02:48 PM