Slave IV

A friend helped me do a log on my car. Just left it on while I drove for a while and we did blocks 003, 004 & 115. Did a WOT pull along the line and got these results:

<Img Src="http://pictureposter.audiworld.com/125294/boost_log.jpg">

<Img Src="http://pictureposter.audiworld.com/125294/maf_log.jpg">

The car is stock except Bi-pipe &amp; 710N's. Should I be worried about the low boost or is that pretty normal for a stock car w/ about 75,000 miles on it?

Thanks for any feedback and I'll log one block at a time next time to get a better sample rate and work on better graphs (unless I did it right already).

canyoncarver2

Boost leak, actual should be very close to requested.

Arcteryx::Stock Rods

looks like you have a boost leak. requested and actual should be really close.

Slave IV

does it tell about my car's condition?

Santorin_OX

<center><img src="http://pictureposter.audiworld.com/92770/boostcurve-82f.jpg"></center><p>

Slave IV

requested on the rest of the curve...

Santorin_OX

You also may want to try and log one block at a time. You'll get a much better sampling rate.

Arcteryx::Stock Rods

log, post, and feedback...rinse and repeat.

Slave IV

Yeah, I realized that and mentioned I would next time in my post. Thanks though!

Slave IV

Thanks agian and will do. What's a good compressor to use w/ a homemade or the vast tester?