removing rear driveshaft
#1
removing rear driveshaft
We have the front subframe disconnected but the driveshaft wont pull out of the tranny. We are tryign to pull the motor forward but it wont budge. am i missing something?
#4
we finally got it
I was following simply's guide and it says remove the 6 A bolts which i assume meant allen bolts, but I coudlnt get the shaft to slide out that way for some reason so we removed the six torx bolts at the end of the tranny to get it off.
Engine is finally out of the car, cant say it has been much fun doing this for the first time but I guess learning is part of the learning curve.
Engine is finally out of the car, cant say it has been much fun doing this for the first time but I guess learning is part of the learning curve.
#5
car minus the engine
<center><img src="http://pictureposter.audiworld.com/647/dcp_1561.jpg"></center><p>I know it will seem worth it once the k04's are in but I was perfectly happy on K03's. damn the turbo lady!! (might as well damn her three times and thank audi for the first two fixes)
Trending Topics
#8
thanks
It is encouraging to see similar pictures. This is by far the biggest automotive undertaking by myself and my brother besides doing a downpipe swap and isntalling springs and struts. I knwo it will all go back together alright but it is still scary to see the whole front of the car laying on the ground.