ONYX

I'm curious as to what method was used to attach the metal mesh (I'm going to use a mesh like that used on the Kamei sport grille) to the plastic faceplate that covers the opening.
It appears the original plastic mesh is attached using either epoxy or a plastic-to-plastic melt.

So if anyone has done this, or had it done, how did they attach the metal to the plastic?

tia
'nyx

katana

I used a plastic weld epoxy to attach plastic hex nuts to the inside of the grills. I then used zip ties to hold the metal mesh to the hex nuts.

madman0

calling smokin_s4! ask him for FAQ.