To those who have RS4 intercoolers: Any regrets on cutting up your car, i.e., bumper?? And ...
#21
The one I used had one hose that was close to too short to make it work...
...that would be the hose connecting the passenger side IC to hoses/pipes coming off of the turbo. That IC is tilted to the side at least 20 degrees to make it fit.
#22
if you plan on using the actual Samco kit for the S4 and making that work with the RS4s, not gonna
happen. I had the entire Samco hose set on my S4 and eventually took everyone off minus the f-hose. If you can try and get the APR hose kit.
#24
Right... I was saying other than the bumper support there is really no cutting except for some
grinding on the rad support with a dremel and some cutting for the 16" fan if you put it in. I agree though the bumper support is pretty much useless after cutting for the FMIC.
#27
None here... really nothing to be concerned with.
A little trim here plus bumper and under tray and that's it.<ul><li><a href="http://www.andersonmotorsport.com/Products/ByModel/S427t/Project-S4b/project-s4b.html">http://www.andersonmotorsport.com/Products/ByModel/S427t/Project-S4b/project-s4b.html</a</li></ul>
#30
AudiWorld Super User
Thread Starter
Join Date: Sep 2001
Posts: 2,190
Likes: 0
Received 0 Likes
on
0 Posts
Waiting for a call back now--will ask. Where do you live? It is a full kit, so I think.
the answer to your question is, yes. here's what I was told was included:
2 IC cores
2 sets brackets/hardware
2 shrouds
1 lower pressure pipe for passenger side
set (4) Samco race hoses (made spec'd for RS4 kit)
with 8 clamps and all mounting hardware
Is something in addition to the above needed besides tools, etc. ?
2 IC cores
2 sets brackets/hardware
2 shrouds
1 lower pressure pipe for passenger side
set (4) Samco race hoses (made spec'd for RS4 kit)
with 8 clamps and all mounting hardware
Is something in addition to the above needed besides tools, etc. ?