REVO Dyno 1.8t GTi 03

Reply Subscribe

Thread Tools

Search this Thread

May 2, 2003 | 11:11 AM

2K1_Audi

Thread Starter

New Member

Joined: Sep 2000

Posts: 6

Likes: 0

REVO Dyno 1.8t GTi 03

<center><img src="http://www.apextuning.com/dyno.gif"></center><p>OK Gang, I know everyone has been wanting to see some real dyno graphs for the REVO chip. Well Here one is
My partner and I decided on a whim that we would stop by the local dyno shop and jump on the DynoJet if he had time for us....turns out he had time for 2 pulls.

Conditions: about 78 degrees outside. Running 93 octane pump gas on the STANDARD REVO 3BAR INSTALL WITH NO SPS MODIFICATION. The numbers below are SAE corrected.

Well, I will let you draw your own conclusions, but I will say that i am impressed with how smooth the power delivery is.

The car that these dynos were done on is STOCK except for the REVO software. (2003 GTI 1.8T)

NC REVO Dealer Looking for TTs to Trial Program on. Please contact apextuning@hotmail.com If interested.

May 2, 2003 | 11:20 AM

JTTek_55

New Member

Joined: Mar 2003

Posts: 65

Likes: 0

Are these runs on a 180 or 225? 180 I hope....

May 2, 2003 | 11:23 AM

seaTTym

Member

Joined: Nov 2000

Posts: 2,770

Likes: 0

R.... oh nevermind

May 2, 2003 | 11:29 AM

TTommyB

New Member

Joined: Sep 2002

Posts: 334

Likes: 0

argh! taskbar is blocking bottom scale

May 2, 2003 | 11:30 AM

JohnLZ7W

AudiWorld Super User

Joined: May 2000

Posts: 21,112

Likes: 1

Would that be RTFP?

May 2, 2003 | 11:31 AM

2K1_Audi

Thread Starter

New Member

Joined: Sep 2000

Posts: 6

Likes: 0

Re: Are these runs on a 180 or 225? 180 I hope....

This was a run on a 180.
The performance of the chip can be tuned with several differnt timing and boost settings, with the SPS3 Kit.
REVO's numbers for the TT are as follows
TT225 non VVT 260Bhp/284ftlbs
TT225 VVT 265Bhp/284ftlbs

I'm estimating on a 180 1.8t I'm getting about
218 crank HP and 264 lbs tq which makes for one very nice upgrade. Smoothness of chip rivals smootness in an S4.