any 180hp guys out there wanting to move up to the 225 parts?
10-04-2006, 06:39 PM
#5
basically, what parts are replaced by the Del Rio stage III? >>
here's a short list of the main parts that i can think of...
intake manifold
FMIC or SMIC if you haven't changed them
throttle body
can you still have a DV relocation on the Del Rio? cut the hose to the TB and insert the T pipe?
intake manifold
FMIC or SMIC if you haven't changed them
throttle body
can you still have a DV relocation on the Del Rio? cut the hose to the TB and insert the T pipe?
10-04-2006, 06:49 PM
#7
Senior Member
Join Date: Jul 2004
Posts: 7,071
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust mani, turbo, downpipe, cats, fuel pump, injectors, F/SMIC and all hoses, charge pipe, MAF
Intake Mani, throttle body, few oil and coolant lines to the turbo..... I think thats about it.
Trending Topics
10-04-2006, 06:53 PM
#9
Senior Member
Join Date: Jul 2004
Posts: 7,071
Likes: 0
Received 0 Likes
on
0 Posts
And you "could" do a DV relocation but the hose going to the throttle body is a hard pipe
There is no longer a silicone hose you can splice into. I thought about having a mounting plate put in so I could mount the GReddy directly to the pipe but there's not a ton of room. Oh, and the MAP sensor also mounts directly to this pipe so the plastic MAP pipe under the battery area is also replaced.
The intake hose from MAF to turbo is also a hard pipe instead of a silicone hose.
Trent
The intake hose from MAF to turbo is also a hard pipe instead of a silicone hose.
Trent